STAKEMILL Online Surveyor Supplies

Sokkia Epic bag with Pole Mount 647016

Sokkia Satel Green Radio Pole Bag 647005

Sokkia EDC34 Cable for BDC56-11 646034

Sokkia EDC19 Charging Adapter BDC25 646003

Sokkia EDC114 AC Converter Only for BDC70 636074

Sokkia EDC114 AC Converter Only for BDC70 (requires EDC113B) 636074

Sokkia EDC113B 115VAC Power Cable for BDC68/70

Sokkia EDC113B 115VAC Power Cable for BDC68/70 - cord only

CST berger 57-LM30 Wizard Rotary Laser Factory Second

Includes - Laser w/case - Factory Second - Full Warranty LM30 Wizard Rotary Laser Get more advanced features for the money! The new LM30 offers all the ease-of-use features of our regular Wizard models, including one-button, leveling, plumbing, and alignment, indoor/outdoor suitability, variable speed rotation plus Spot mode, and one person operation. However, the LM30 gives you even more! Dual beams (level and plumb) are standard, as well as short and long chalk line point and shoot sweep modes, and LED mode indicator. Protected level vials prevent damage and shield vials from the sun to prevent misreads. In addition, the LM30X model features an automatic out-of-level shut-off sensor, and is compatible with an optional remote control. LM30 Wizards are ideal for indoor and outdoor uses , including drop-ceiling installation, finish carpentry, floor or wall tile installation, porch or deck construction, foundation layouts, and more. Laser Diode 635nm Visible Red Beam Leveling Accuracy 1/4 at 100' (6mm at 30m) Working Range Up to 200' (60m) Indoor Diameter; Up to 800' (244m) Outdoor Diameter with Optional Laser Detector Plumb Beam Yes, 10 minute Vial Sensitivity Level Beam Yes, 5 minute Vial Sensitivity Leveling Method Manual - Two Screw Weight 3.6lbs (1.6kg) with Batteries Power Four (4) C Cell (Alkaline Recommended) : 60 Hours Intermittent Use Rotation Speed Two Speed 360 - 150 RPM, 600 RPM, Spot Mode Special Features One Button Operation, Dual 5/8x11 Tripod Thread for Horizontal and Vertical Mount, Short and Long Sweep Modes, Protected Shade Level Vials, Built-in Trivet, Emits Eye-Safe Laser Light Includes Carrying Case, Batteries, and Instruction Manual Warranty One Year Includes - Laser w/case - Factory Second - Full Warranty Don't forget to pick up a Laser Detector, Tripod and Grade Rod to make it a complete kit.

Sokkia Tripod Hook Bracket for Allegro Data Controllers 552072

Tripod Hook Bracket forAllegro / Explorer / JettCEData Controllers . The bracket is constructed ofanodized aluminum. It comes with an installation tool and an instruction sheet. SECO 5196-16

Allegro Alkaline Battery Holder

Allegro Alkaline Battery Holder No need to recharge Allows you to purchase batteries out in the field Great for remote sites where AC charger will not work The ideal battery to use on collectors with Bluetooth as the rechargeables do not have enough power

Sokkia Carlson Explorer II Allegro CX Bluetooth CF Card

Sokkia Carlson Explorer II Allegro CX Bluetooth CF Card - requires PCMCIA card adpater

David White AutoLaser 3110-GR Rotary Laser Factory Seconds

Factory Seconds Exterior Single-Slope Rotary Laser, Electronic Self-Leveling 650nm High-powered visible beam, class 2M Durable plastic housing 1/16-in.(1.5mm) accuracy at 100-ft.(30m) with up to 2800-ft.(850m) range Horizontal self-leveling range of 5 Single speed 600 RPM rotation, manual mode single grade axis up to 10 90-Daywarranty 48-3110GR 4-D cell batteries, LD-18N detector, and carrying case

Sokkia DB9 (9-Pin) to SET (Hirose) Standard Coiled Cable 551050

Sokkia SDR-Nikon DTM-A Data Cable 530666

Sokkia SDR-Geodimeter 600-Series Data Cable 530651

Sokkia SDR-Geodimeter 400-Series Data Cable 530650

Sokkia SDR-Pentax Data Cable 530620

Sokkia SDR-Wild (Leica) Data Cable 530612

Sokkia SDR-Wild (Leica) Data Cable

Planix 7 Tamaya Digital Planimeters 365170

Tamaya digital planimeters are excellent tools to use when measuring irregular-shaped areas on plans or drawings. They eliminate the need for grids, charts, or calculations done by hand. PLANIX 7 with numeric keyboard allows user input of scale so area from plan or drawing can be computed. PLANIX 6 and PLANIX 7 (roller planimeters) are attached to wheels that allow unlimited horizontal travel and vertical travel within the limits of the arm movement. Models PLANIX 5 PLANIX 6 PLANIX 7 Power Internal NiCd or AC adaptor Operating hours After 15 hours recharge : 30 hours Display method LCD with zero suppression Resolution One digit corresponds to 0.1cm2 or 0.01 in.2 Accuracy Better than +/- 0.2 (+/- 2/1000 pulses) Display capacity 8 digits output/input, HOLD, MEMO, BATT E, READY, cm2, in2 -- -- SCALE, m2, km2, ft2, acre Measuring range 35.6cm dia. 14 dia. 300cm x 30cm 118 x 11.8 Weight Approx. 900g Approx. 650g Dimension (Polar arm length) 64 x 213 x 39mm (222mm) 150 x 240 x 39mm Carrying case 183 x 260 x 64 mm 9651;=Option PLANIX 5 PLANIX 6 PLANIX 7 PLANIX12288; 10S Marble PLANIX EX PLANIX EX-L X, Y coordinates * * * * 9675; 9675; External outputs * * * * 9675; 9675; Area 9675; 9675; 9675; 9675; 9675; 9675; Side length * * * 9675; 9675; 9675; Line length * * * 9675; 9675; 9675; Radius * * * * 9675; 9675; Center point * * * * 9675; 9675; Triangle (base length, height and area) * * * * 9675; 9675; Angle (side length and angle) * * * * 9675; 9675; Scale: key input * * 9675; 9675; 9675; 9675; Scale: PLOT-real measurement correction * * * 9675; 9675; 9675; Measuring area for differing scale of X, Y * * Area only Area only 9675; 9675; Sum and average measurement 9675; 9675; 9675; 9675; 9675; 9675; Decimal point set-up * * * 9675; 9675; 9675; Auto power off 9675; 9675; 9675; 9675; 9675; 9675; Calculation * * * * 9675; 9675; Display dot LCD 8 digits x 1 line dot LCD 16 digits x 2 lines dot LCD 17 digits x 3 lines Measuring range 300mm x 300mm 300mm x 3m 300mm x 10m 380mm x 10m 450mm x 10m Minimum line reading 0.1cm 0.05mm Accuracy 0.2 0.1 Auto close function * * * 9675; 9675; 9675; Automatic numbering * * * * 9651; 9651; Printer * * * * 9651; 9651; RS-232C interface cable * * * * 9651; 9651;

Planix 6 Tamaya Digital Planimeters 365161

Tamaya digital planimeters are excellent tools to use when measuring irregular-shaped areas on plans or drawings. They eliminate the need for grids, charts, or calculations done by hand. PLANIX 5 and PLANIX 6 measure area in actual square centimeters or square inches. Area shown in plan or drawing must be calculated from this value. PLANIX 6 and PLANIX 7 (roller planimeters) are attached to wheels that allow unlimited horizontal travel and vertical travel within the limits of the arm movement. Models PLANIX 5 PLANIX 6 PLANIX 7 Power Internal NiCd or AC adaptor Operating hours After 15 hours recharge : 30 hours Display method LCD with zero suppression Resolution One digit corresponds to 0.1cm2 or 0.01 in.2 Accuracy Better than +/- 0.2 (+/- 2/1000 pulses) Display capacity 8 digits output/input, HOLD, MEMO, BATT E, READY, cm2, in2 -- -- SCALE, m2, km2, ft2, acre Measuring range 35.6cm dia. 14 dia. 300cm x 30cm 118 x 11.8 Weight Approx. 900g Approx. 650g Dimension (Polar arm length) 64 x 213 x 39mm (222mm) 150 x 240 x 39mm Carrying case 183 x 260 x 64 mm 9651;=Option PLANIX 5 PLANIX 6 PLANIX 7 PLANIX12288; 10S Marble PLANIX EX PLANIX EX-L X, Y coordinates * * * * 9675; 9675; External outputs * * * * 9675; 9675; Area 9675; 9675; 9675; 9675; 9675; 9675; Side length * * * 9675; 9675; 9675; Line length * * * 9675; 9675; 9675; Radius * * * * 9675; 9675; Center point * * * * 9675; 9675; Triangle (base length, height and area) * * * * 9675; 9675; Angle (side length and angle) * * * * 9675; 9675; Scale: key input * * 9675; 9675; 9675; 9675; Scale: PLOT-real measurement correction * * * 9675; 9675; 9675; Measuring area for differing scale of X, Y * * Area only Area only 9675; 9675; Sum and average measurement 9675; 9675; 9675; 9675; 9675; 9675; Decimal point set-up * * * 9675; 9675; 9675; Auto power off 9675; 9675; 9675; 9675; 9675; 9675; Calculation * * * * 9675; 9675; Display dot LCD 8 digits x 1 line dot LCD 16 digits x 2 lines dot LCD 17 digits x 3 lines Measuring range 300mm x 300mm 300mm x 3m 300mm x 10m 380mm x 10m 450mm x 10m Minimum line reading 0.1cm 0.05mm Accuracy 0.2 0.1 Auto close function * * * 9675; 9675; 9675; Automatic numbering * * * * 9651; 9651; Printer * * * * 9651; 9651; RS-232C interface cable * * * * 9651; 9651;

Planix 5 Tamaya Digital Planimeters 365151

Tamaya digital planimeters are excellent tools to use when measuring irregular-shaped areas on plans or drawings. They eliminate the need for grids, charts, or calculations done by hand. PLANIX 5 and PLANIX 6 measure area in actual square centimeters or square inches. Area shown in plan or drawing must be calculated from this value. PLANIX 5 (polar planimeter) is attached to a weighted base by an arm that allows movement within a circular area Models PLANIX 5 PLANIX 6 PLANIX 7 Power Internal NiCd or AC adaptor Operating hours After 15 hours recharge : 30 hours Display method LCD with zero suppression Resolution One digit corresponds to 0.1cm2 or 0.01 in.2 Accuracy Better than +/- 0.2 (+/- 2/1000 pulses) Display capacity 8 digits output/input, HOLD, MEMO, BATT E, READY, cm2, in2 -- -- SCALE, m2, km2, ft2, acre Measuring range 35.6cm dia. 14 dia. 300cm x 30cm 118 x 11.8 Weight Approx. 900g Approx. 650g Dimension (Polar arm length) 64 x 213 x 39mm (222mm) 150 x 240 x 39mm Carrying case 183 x 260 x 64 mm 9651;=Option PLANIX 5 PLANIX 6 PLANIX 7 PLANIX12288; 10S Marble PLANIX EX PLANIX EX-L X, Y coordinates * * * * 9675; 9675; External outputs * * * * 9675; 9675; Area 9675; 9675; 9675; 9675; 9675; 9675; Side length * * * 9675; 9675; 9675; Line length * * * 9675; 9675; 9675; Radius * * * * 9675; 9675; Center point * * * * 9675; 9675; Triangle (base length, height and area) * * * * 9675; 9675; Angle (side length and angle) * * * * 9675; 9675; Scale: key input * * 9675; 9675; 9675; 9675; Scale: PLOT-real measurement correction * * * 9675; 9675; 9675; Measuring area for differing scale of X, Y * * Area only Area only 9675; 9675; Sum and average measurement 9675; 9675; 9675; 9675; 9675; 9675; Decimal point set-up * * * 9675; 9675; 9675; Auto power off 9675; 9675; 9675; 9675; 9675; 9675; Calculation * * * * 9675; 9675; Display dot LCD 8 digits x 1 line dot LCD 16 digits x 2 lines dot LCD 17 digits x 3 lines Measuring range 300mm x 300mm 300mm x 3m 300mm x 10m 380mm x 10m 450mm x 10m Minimum line reading 0.1cm 0.05mm Accuracy 0.2 0.1 Auto close function * * * 9675; 9675; 9675; Automatic numbering * * * * 9651; 9651; Printer * * * * 9651; 9651; RS-232C interface cable * * * * 9651; 9651;

RS-232C I/F Cable for EX w/Data Collecting Software

RS-232C I/F Cable forPlanix EX w/Data Collecting Software

Printer Paper for Planix EX Printer (10 roll pack)

Printer Paper for Planix EX Printer (10 roll pack) Similar to photo

SVR Surveyor Series Grade Rods SVR 25 10ths 099362

SEE SECO/CRAIN ITEM 98010 NEW STYLE SVR Series Leveling Rods Our SVR Series Leveling Rods have a rectangular-oval shape, flat on the front and back with round corners. This convenient shape prevents the scale from rolling, making observation much easier. The rods are also water-proof, corrosion-resistant, and non-conductive. The SVR Series rods have a measuring scale on the back (with the exception of the two-scaled rods) that allow the user to read overall height measurements at eye level, which is useful in making clearance and height measurements. Also on the back-side with the measuring scale, there are alternate 1 red and white markings that are suitable for stadia purposes. The newly redesigned locking mechanism now features round buttons. Tight and accurate, the lock is specifically designed to resist jamming from sand and dirt. Disassembly is quick and easy. Simply press the lock buttons and pull the sections out. To further disassemble, a Phillips screwdriver is needed. The thread in the top section of the SVR is x 20, but can be adapted to 5/8 x 11 by purchasing an adapter. Brackets are needed to attach laser sensors to the SVR Series. Reading the Measuring Scale: To read the measuring scale on the USL , the height measurement is read at the top of the base section. To read the measuring scale on the New and Original SVR, the height measurement is read at the top of the first unextended section. USL Series SVR Series 16 and 25 Models Available 16 and 25 Models Available All sections collapse inside base All sections stack on top of each other Collapsed Lengths: USL-25 59 5/8 USL-16 56 Collapsed Lengths: SVR-25' (NEW) 58 SVR-25 (Original) 66 SVR-16 59 Model Graduations USL Series Feet, Tenths, Hundredths Feet, Inches, Eighths Meters, Decimeters, Centimeters (E metric scale only metric scale available on the USL Series) SVR Series Feet, Tenths, Hundredths Feet, Inches, Eighths Meters, Decimeters, Centimeters (E metric) Meters, Decimeters, Centimeters, 0.5 Centimeters (0.5 Centimeter and Philly Metric Models) Two-Scaled SVR Series (two leveling scales and no measuring scale) Tenths, Inches Tenths, Philly Metric For older models, stacking kits are available for the USL to make the sections stack like the SVR. NOTE: If the stacking kit is installed on an USL, the measuring scale on the back-side becomes inoperable. SVR and USL sections are not interchangeable. To read the measuring scale on the USL, the height measurement is read at the top of the base section. To read the measuring scale on the SVR, the height measurement is read at the top of the first unextended section. Our SVR Series Leveling Rods have a rectangular-oval shape, flat on the front and back with round corners. This convenient shape prevents the scale from rolling, making observation much easier. The rods are also water-proof, corrosion-resistant, and non-conductive. The SVR Series rods have a measuring scale on the back (with the exception of the two-scaled rods) that allow the user to read overall height measurements at eye level, which is useful in making clearance and height measurements. Also on the back-side with the measuring scale, there are alternate 1 red and white markings that are suitable for stadia purposes. The newly redesigned locking mechanism now features round buttons. Tight and accurate, the lock is specifically designed to resist jamming from sand and dirt. Disassembly is quick and easy. Simply press the lock buttons and pull the sections out. To further disassemble, a Phillips screwdriver is needed. The thread in the top section of the SVR is x 20, but can be adapted to 5/8 x 11 by purchasing an adapter. Brackets are needed to attach laser sensors to the SVR Series. Reading the Measuring Scale: To read the measuring scale on the USL, the height measurement is read at the top of the base section. To read the measuring scale on the New and Original SVR, the height measurement is read at the top of the first unextended section. USL Series SVR Series 16 and 25 Models Available 16 and 25 Models Available All sections collapse inside base All sections stack on top of each other Collapsed Lengths: USL-25 59 5/8 USL-16 56 Collapsed Lengths: SVR-25' (NEW) 58 SVR-25 (Original) 66 SVR-16 59 Model Graduations USL Series Feet, Tenths, Hundredths Feet, Inches, Eighths Meters, Decimeters, Centimeters (E metric scale only metric scale available on the USL Series) SVR Series Feet, Tenths, Hundredths Feet, Inches, Eighths Meters, Decimeters, Centimeters (E metric) Meters, Decimeters, Centimeters, 0.5 Centimeters (0.5 Centimeter and Philly Metric Models) Two-Scaled SVR Series (two leveling scales and no measuring scale) Tenths, Inches Tenths, Philly Metric For older models, stacking kits are available for the USL to make the sections stack like the SVR. NOTE: If the stacking kit is installed on an USL, the measuring scale on the back-side becomes inoperable. SVR and USL sections are not interchangeable. Sokkia Item 099362 25' SVR 10ths SVR old part numbers 90340 90341 90302 90346 SVR new part numbers 98010

Sokkia Tack Ball 096000

This convenient rubber ball is used as a pin cushion for holding stake tacks. It's got a belt loop built-in. Sokkia Item 096000 SECO Item 2180-00

Stake Whiskers White Bundle of 25

Stake Whiskers are unique marking devices for many types of surface applications. Brightly colored, durable and resilient, they are easily and conveniently attached to wooden stakes or to 60-penny nails. These extraordinary markers are ideal for highway and road construction, grade stakes, hubs, reference points, bench marks, center lines, utility line paths, forestry, agriculture, exploration and seismographic applications. Available colors are blue, red, orange, yellow, white, green, glo-pink, and glo-orange.

Stake Whiskers Pink Glo Bundle of 25

Stake Whiskers Blue Bundle of 25

Stake Whiskers Red Bundle of 25

Stake Whiskers Green Bundle of 25

Stake Whiskers Orange Bundle of 25

Stakemill 1/2 Inch Wide Cotton Stylus Lanyard (Set) Yellow

Lanyard Stylus pen convenient when needed Safety release Swivel mounted clip 16.5length - 1/2 Wide STAKEMILL logo Includes Two Lanyards

Pro Mark 3 Mobile Mapper CE CX External Antenna Cable Only

This cable will allow you to attach a standard TNC cable - Approx 5 foot in length - PM3 - MMCX Right Angle Lemo Female Plug - Needs no adapters

OK1 Safety OK-ILDOTMZ Class 2 Survey Vest Lime

4 DOT Trim Two Pockets (1 Inside, 1 Outside) ANSI Class II Compliance Cool, Breathable Mesh Fabric Heavy Duty Zipper Model: OK-ODOTMZ Color: Fluorescent Lime (not shown in photo) Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) More About Our Traffic Safety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

BOSCH GRL145HV SELF-LEVELING ROTARY LASER

Horizontal and Vertical Electronic Self-Leveling Rotary Laser Model GRL145HV Available April 2009 Electronic Horizontal and Vertical Leveling (top position) Electronic Sloping Capability Precision made Simple. Features Electronic Horizontal and Vertical Leveling - Ensures accuracy and eliminates set up time Beam Customization - 0-lengths (0, 20 45, 90 and 180) and 3 rotation speed (120, 450, 800 RPM) settings for diverse application and lighting conditions Easy Field Recalibration - Maintain accuracy and prevent downtime Electronic Horizontal and Vertical Sloping up to +/- 5 Vertical (Laydown) Jobs - Vertical self-leveling allows rotary laser to be positioned in laydown for vertical applications Squaring Plumb/Laser Point on Top of Unit - Projects at 90 10 seconds relative to the main beam Robust Housing - Water and dust proof (IP54) RCR2 Laser Receiver with built-in Remote Control - Radio-frequency remote allows for control of all functions 500-ft RCR2 RF Remote Range - No direct line of sight required and obstructions are no problem Limited 3-Year Warranty LCD Display on Both Sides of RCR2 for easy beam location readout Includes (1) -- RCR1 Remote Control/Receiver (4) -- D Batteries (1) -- 9V Battery (1) -- Pair of Laser Glasses (1) -- Rod Bracket (1) -- Wall Mount (1) -- Magnetic Target (1) -- Carrying Case Specifications Accuracy: Up to +/- 1/8-in @ 100-ft (Horizontal Vertical) Country of Origin: China Dimensions: 5-3/4 x 7x 7 Laser Diode: Class II 635 nm, 8804; 5 mW Leveling Type: Electronic Self-Leveling, Up to 6 Mount Threading: 5/8 - 11 Range: Up to 1,000-ft Weight (lbs.): 5.5 Download Brochure

Trimble TSC OEM Battery Pack NiMH non SS part numbers

Internal NiMH battery pack for Ranger The Real Deal by TDS 4.8V 4000mAh This is for older TDS Rangers that have a concealed battery, if your battery has a USB and DB9port on it please see other choice here . Cross Reference Tripod Data Systems, ranger, AT WORK COMPUTERS ATW, XHR-4/3AUX, HR4/3AU-F4C, TRIMBLE A075-2003, AT WORK COMPUTERS , TRIMBLE TSCe, GIS TSCe, RANGER, RNER-00002400, H-075-335-200R-032, TDS Ranger battery

Crain Aluminum Tripod Quik Clamp Flat Head 22214

These tripods are built to last with heavy construction throughout, and are designed to withstand rigorous field conditions. All Crain tripods have a durable powder-coated finish. Significant advantages in volume and efficiency enable Crain to not only offer superior tripods, but at the best prices. 5/8 x 11 Thread Stud Legs extend to 65 inches (1.65m)

SECO Tack Ball 096000 2180-00

This convenient rubber ball is used as a pin cushion for holding stake tacks. It's got a belt loop built-in. Sokkia Item 096000 SECO Item 2180-00

SECO Stake Tack Ball Clip 096000 2180-01

This convenient rubber ball is used as a pin cushion for holding stake tacks. It's got a belt loop built-in with quick hook. Sokkia Item 096000 SECO Item 2180-01

SECO 1 Meter Pole Extension 25mm OD

OK1 Safety OK-TSV Technical Surveyor's Vest Flo Orange

Technical Surveyor's Vest Total of Eleven Pockets Large Rear Zipper to Pocket ANSI Class II Compliant Solid Polyester Material Orange Reflective Tape Model: OK-TSV Orange Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) Color: Flourescent More About Our Traffic Safety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

OK1 Safety OK-TSLV Technical Surveyor's Vest Flo Lime

Technical Surveyor's Vest Total of Eleven Pockets Large Rear Zipper to Pocket ANSI Class II Compliant Solid Polyester Material Orange Reflective Tape Model: OK-TSLV Color: Flourescent Lime Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) More About Our Traffic Safety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

OK1 Safety OK-ILDOT3MZ-04 Class 3 Survey Vest

ANSI Class III Compliance Breathable Mesh Fabric 4 Reflective DOT Trim Zipper for Easy On/Off Washable Model: OK-ILDOT3MZ-04 Color: Fluorescent Lime Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) More About Our Traffic Sa fety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

OK1 Safety OK-ODOT3MZ-04 Class 3 Survey Vest

ANSI Class III Compliance Breathable Mesh Fabric 4 Reflective DOT Trim Zipper for Easy On/Off Washable Model: OK-ODOT3MZ-04 Color: Fluorescent Orange Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) More About Our Traffic Safety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

OK1 Safety OK-ODOTMZ Class 2 Survey Vest Orange

4 DOT Trim Two Pockets (1 Inside, 1 Outside) ANSI Class II Compliance Cool, Breathable Mesh Fabric Heavy Duty Zipper Model: OK-ODOTMZ Color: Fluorescent Orange Sizes: Large (38-42), XL (42-46),2XL (48-52), 3XL (52-56), 4XL (56-64), 5XL (60-72) More About Our Traffic Safety OK1s new traffic safety line includes high-visibility vests and pants. Featuring Reflexite and 3Ms Scotchlite Reflective Material, these products come in ultra-bright orange or lime and meet ANSI Class 1, 2 and 3 standards for fabric, materials and design. Visible from up to 1,280 feet, the traffic safety line is designed to protect your employees from road hazards. SURVEYOR VESTS DSO DSL SVCMBO Open Mesh Triple Reflective Trim High Gloss Tape - Yellow Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green ANSI SURVEYOR VESTS - POLYESTER SVO SVL SVO2 SVL2 ANSI Standard Polyester Reflexite Stripe Shoulder Stripes One Horizontal Stripe Two Horizontal Stripes Heavy Duty Nylon Zipper Pockets Washable Flurorescent Orange Flurorescent Lime Green

Mobile Mapper 6 External Antenna Cable Only

This cable will allow you to attach a standard TNC cable - 5 foot in length - MM6 Male Plug - Needs no adapters TNC-M-RG58-5FT-SMB-RM

Mobile Mapper CX Post Processing Enhancement Kit

Great for either the Mobile Mapper 6 or the Mobile Mapper CE/CX Units (MM6 uses a different plug than the CX) We have packaged everything you need to take advantage of getting better accuarcey with your unit that has Post Processing or the Localozation feature found in FastSurvey. We have assembled a lightweight 2 meter GPS pole with a 3.5 Antenna, cable, cradle and collector clamp along with a pair of stylus pens and lanyards. This is over a 775 value.

Mobile Mapper 6 Post Processing Enhancement Kit

Antcom Active L1 GPS Antenna 3.5 Circular Diameter TNC

Antcom Active L1 GPS Antenna 3.5 Circular Diameter TNC Connector White Part 3G15A-XT-1 Input Voltage: 2.5 to 24V Power Handeling: 1 Watt LNA Gain: 33dB LNA Options: Passive, 20dB, 33dB or 40dB active Connectors: TNC Color: White Don't forget the cable - MM6 uses a different one than the CE/CX or PM3

Stock Pile Volumes Calculations Mobile Mapper 6 TruPulse 360B

We have prepackaged everything you need to get out in the filed and start calculating Stock Piles and Volumes or even record offset distance of utility or other assets. Included are: Magellan Mobile Mapper 6 with FastSurvey GIS with Bluetooth and GPS LaserTech TruPulse 360B Range Finder with Bluetooth and Electronic Compass 2 Meter Lightweight Aluminum GIS Pole American Made Tripod for GIS Pole Pole Clamp and Cradel (Ram Mount) for Mobile Mapper 6 Landscape Mode Pole Clamp and Cradel for TruPulse Two Neck Lanyards and Stylus Pens Carry Case for both units

Carlson Explorer 600+ with Carlson SurvCE GPS Roading

Features High Speed Processor Fast 624 Mhz Xscale processor! More Memory 128Mb SDRAM 512Mb System Flash Powerful Software Starting at only 2995 with Carlson SurvCE installed! More Durable Weather resistant shell rated to withstand wind-driven rain (IP65 ingress protection ) Better Control New keyboard designed for surveyors! Handstrap and stylus. Bright Display QVGA-TFT color, sunlight readable touch screen Powerful Connectivity Comes standard with WiFi and Bluetooth, USB port, Serial port, CF slot Carlson Explorer II is powered with Carlson SurvCE , for the most powerful and easy to use data collection package. Available in two color combinations blue and blue/orange. Convenient handstrap and stylus. Compact flash card slot, RS232 serial interface and USB Port. Water-resistant full function alpha numeric elastomeric keyboard. Carlson Explorer 600+ Specifications: Power: Nickel Metal Hydride rechargeable batteries (2500 mAH, 7.2V) AA Alkaline batteries (6) Recharge/Line Power: 11 to 18 VDC, 1.5A 8 hours minimum operating time Display: QVGA-TFT color sunlight readable display, with white LED Backlight Resolution: 320 x 240 pixels color Touch Screen Environmental: Operating temperature: -20C to +50C Storage temperature: -20C to +70C Charging Temperature: -20C to +40C Humidity: 5 - 95 Non-condensing IP65 ingress protection CPU: Type: Intel PXA270 processor with Xscale technology Speed: 624 MHz Operating System: Windows CE .NET 4.2 or 5.0 professional Memory and Mass Storage: SDRAM: 128MB Internal Compact Flash: 512MB Compact flash card slot Connectivity: Wireless Bluetooth and Wireless LAN 802.11b Integrated Wireless Management System - Adaptive Frequency Hopping Technology (AFH) - Packet Traffic Arbitration (PTA) Extended Synchronous Connection Orientation (eSCO) - Higher Quality Voice - Faster Connection Times Quality of Signal and Security - 40 and 128 Bit WEP - WPA, CCX (Cisco Security), TKIP and AES - Support for 802.11i extension Dedicated Processor - ARM7 MAC protocol processor Wired USB Client (mini USB A/B Connector) RS-232 Serial Port, USB Port) User Input: Touch screen Full function alpha numeric elastomeric keyboard Indicators: 5 programmable LED Indicators including Charge/Low Battery Indicator Physical Dimensions: Height (H): 9.84 inches (250mm) Width (W): 4.75 inches (120.7mm) Depth (D): 1.83 inches (46.5mm) Weight with NiMH Batteries: 29 ounces (822 grams) Warranty: Two years Screen Shots Collect points in the graphics mode. Tab based menu structure. Compute volumes in SurvCE 2. Hot List lets users jump to routines. Supports an unlimited number of localization points. Angle Sets in Store Points Faster, more efficient collection. Job Settings Customize layers, colors, cutsheets, descriptions and much more. Point Number by Interval Advanced point ID controls. Leveling Collect and process trigonometric digital level loops. Instrument Switching SurvCE keeps track of every instrument, so switching equipment is fast and easy. Feature Coding Add numerous coding styles functions. Help Click to get the help document for the current routine. Pricing Product Price Carlson Explorer 600+ with Carlson SurvCE 2995.00

Carlson Explorer 600+ with Carlson SurvCE GPS

Carlson Explorer 600+ with Carlson SurvCE RTS Roading

Carlson Explorer 600+ with Carlson SurvCE RTS Robotic

Tamaya Planix Printer and Paper for PLANIX EX and PLANIX EX-L

PLANIX Printer for PLANIX EX and EX-L Planimeters, with 2 Rolls of Paper

Tamaya Planix EX-L Planimeter 3651-22

The PLANIX EX-L not only allows you to quickly and accurately measure areas, but it also allows you to calculate lengths, coordinates, radii, and angles. Functions: X, Y coordinate Side length Line Area Center point Radius Triangle Angle RS232C cable (Optional) Printer (Optional) Features: Easy Measurement The automatic closing function, which automatically finishes measurement when the trace point is returned to the starting point, makes measurement easier. Wide Variety of Measurement Units The PLANIX EX and EX-L are not only equipped with metric units (mm, cm, m, and km) but also provide the user with such units as in., ft., yd., mi., and acres, as well as other user-defined units. Two Modes Are Better Than One With the Point mode, the user can more easily and more quickly obtain areas and lengths of diagrams with straight lines. The Stream mode should be used for tracing curves on curved lines. Options: RS-232C interface Cable (Sold Separately) Thermal Printer (Sold Separately) Specifications: Power: Internal NiCd or AC adaptor Operating time: 40 hours after 15 hours recharge Display: LCD, 17 digits on 3 lines Measuring Range: 450 mm x 10 m (17 in. x 32.5 ft.) Accuracy: +/- 0.1 (for an area of 100 x 100mmt) Minimum line reading: 0.05 mm Dimensions: 400 x 43 x 165 mm Carrying case: 465 x 70 x 245 mm Weight: Approx. 1.4 kg Similar to image below

Tamaya Planix EX Digital Roller Planimeter

The PLANIX EX not only allows you to quickly and accurately measure areas, but it also allows you to calculate lengths, coordinates, radii, and angles. Functions: X, Y coordinate Side length Line Area Center point Radius Triangle Angle Features: Easy Measurement The automatic closing function, which automatically finishes measurement when the trace point is returned to the starting point, makes measurement easier. Wide Variety of Measurement Units The PLANIX EX and EX-L are not only equipped with metric units (mm, cm, m, and km) but also provide the user with such units as in., ft., yd., mi., and acres, as well as other user-defined units. Two Modes Are Better Than One With the Point mode, the user can more easily and more quickly obtain areas and lengths of diagrams with straight lines. The Stream mode should be used for tracing curves on curved lines. Options: RS-232C interface Cable (Sold Separately) Thermal Printer (Sold Separately) Specifications: Power: Internal NiCd or AC adaptor Operating time: 40 hours after 15 hours recharge Display: LCD, 17 digits on 3 lines Measuring Range: 380 mm x 10 m (14 in. x 32.5 ft.) Accuracy: +/- 0.1 (for an area of 100 x 100mmt) Minimum line reading: 0.05 mm Dimensions: 350 x 43 x 165 mm Carrying case: 365 x 65 x 195 mm Weight: Approx. 1 kg

Tamaya Planix 10S Marble Digitizing Area Line Meter

The Digitizing Area-line Meter Planix Marble 10S, compact and light weight, it only weighs 630g and the compact design makes for easier measurement. The plot key is now right next to the trace lens, allowing you to operate the new Marble easily, with one hand. Total and Average as you go By measuring the same diagram a more number of times, a more accurate average or cumulative measure for large scale diagrams can easily be carried out with these special keys. Measurement of Reduced/Enlarged Scale and the vertical scale with different horizontal scale The Planix Marble 10S can also measure area of a scaled plan. The resulting measurement will be the dimensions of the object measured. Auto-close function Automatically finishes measuring when it is returned to the starting point during measurement. Specifications: Measuring Function: Area, Line, Side Lengths Measuring Scale: mm, cm, m, km, in, ft, acre/yd Measuring Range: 300mm x 10m Measuring Accuracy: +-0.1 (100x100mm area measurement) Display: LCD 16 digits on 2 lines Minimum Line Reading: 0.05mm Power: Internal Nickel Metal Hydride Battery or AC Charger/Adaptor Battery Life: 20 hours use (depends on type or brand of battery) Dimensions: 250L x 110W x 40H mm Includes AC Charger/Adaptor Manufacturers warranty: One Year Switching by Lines Point/Stream (continuous) mode key allows conversion between point mode measurement for plotting points on straight lines and stream mode for tracing curves on curved lines. Key Operation At P1 Press PLOT Key. Move the tracing point to P2. You do not need to trace a precise line from P1 to P2. At P2 Press PLOT key. Move the tracing point to P3. You do not need to trace a precise line from P2 to P3. At P3 Press POINT/STREAM key to change to stream mode. Tracing along to curved line to P1. It shows measurement result automatically.

Stakemill Mobile Mapper 6 MM6 Talon Anti Crush Ram Link

Stakemill USA Talon Series Controller Collector Cradle Designed for the Fast Survey MM6 Right hand or Left Hand S tandard Compass and Vial Level included at no extra costs U niversal pole clamp capacity of 0.75[19mm] to 1.5[38mm] Ball and Socket Ram Link S uper fine angle adjustment with 2 highly secure lock pins Every cradle is custom engineered for each collector on the market A nti-slip deep knurled lock knobs I ntegrated rubber inserts to protect you valuable collector units C onstructed of aircraft grade 6061-T6 Billet Aluminu m B lack anodize finish with high tech laser engraving Many accessories available to use with SI original pole clamps Cradles with Quick Release: Magellan MMCX PN: SI-6350 Magell a n MM6 PN: SI-6351 Topcon FC2500 PN: SI -6352 TDS NOMAD PN: SI-6353 TDS RANGER PN: SI-6354 Topcon FC2 2 00 PN: SI- Sokkia Carlson Juniper Trimble OtterBox Pole clamp in picture not included

Apache Storm Top Mount Bracket

The 91162 clamp, designed for the Apache Storm laser receiver, attaches to the top section of any Crain fiberglass SVR. This configuration allows the user to utilize the height scale on the back of the SVR. This bracket features all-metal construction. Weighs 0.20 lb (0.09 kg)

Aerial Flagging White 300 Foot Roll 36 Inches Wide

Aerial Paneling For aerial mapping and surveying jobs,Sokkia Aerial Paneling can be easily placed along a predetermined perimeter of an area to be photographed. Aerial Paneling 36 x 300' Color White SECO 9045-04

Aerial Flagging White 300 Foot Roll 24 Inches Wide

Aerial Flagging White 300 Foot Roll 18 Inches Wide

Aerial Flagging White 300 Foot Roll 12 Inches Wide

SECO Flip Lock Lever and Squeeze Plates for Tripods

Includes the flip lock and metal plates to fix broken tripods

SECO Claw Ball and Socket Cradle FC2500

The Claw Series Ball-and-Socket Controller/Collector Cradle Workabout Pro The streamlined design of this new cradles fits the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an anti-crush feature that locks up the cradle when tight, but is limited the risk of accidentally damaging the controller or collector is greatly reduced. The cradles are constructed of corrosion-resistant anodized aluminum and their stainless steel clamp screws feature non-jamming coarse threads for easy open and close use. Use with a Ball-and-Socket pole clamp of your choice (5200-16X) and Ball-and-Socket Link (5200-201) to create a custom unit for your pole. Similar to below image

SECO Claw Ball and Socket Cradle Carlson, Surveyor+

SECO Ball and Socket Link

The Ball-and-Socket Link is perfect for your custom data collector or controller cradle solution. It fits the 1-inch ram ball on cradles and clamps.

SECO Claw Quick Release Cradle FC2500

The Claw Series Quick-Release Controller/Collector Cradle Heres the next generation of quality SECO all-metal collector/controller cradles. The streamlined design of these new cradles fit the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an anti-crush feature that locks up the cradle when tight, but is limited the risk of damaging controller is greatly reduced. These new cradles are constructed of corrosion-resistant anodized aluminum and the stainless steel clamp screws feature non-jamming coarse threads for easy open and close use. The optional Claw Quick-Release Pole Clamp (5200-150, shown attached to cradle above right) has the same features as the cradle; it cannot crush the pole and the stainless steel clamps screw threads are coarse for fast opening and closing. The cradle can be used with SECO Open Pole Clamps. For 1.25-inch (32-mm) diameter pole only. Cradel Part No: Design For: 5200-063FC-2500 similar to photo

SECO Claw Quick Release Cradle Carlson, Surveyor+

SECO Flexible Tripod Bracket

This economy model aluminum bracket fits snugly on a tripod and holds the Allegro, Archer, Explorer, Recon or JETTce controller to a SECO or similar brand instrument tripod. Weighs 0.05 lb (0.02 kg)

SECO Prism Pole Point MALE THREAD Removable Hex Tip 5194-04

HAS A MALE 5/8 x 11 THREAD This point features analuminum body and an easy-to-replace steelpoint. Weighs 0.18 lb (0.07 kg)

SECO Prism Pole Point Removable Hex Tip DULL 5194-03

This point features an anodized aluminum body and an easy-to-replace steel DULL point. Weighs 0.16 lb (0.07 kg)

SECO Lightweigt Point, Prism Pole Removable Tip 5194-01

Point, Prism Pole Aluminum Body with Removable Plumb Bob Tip 5194-01 Thisaluminum body replacement point fits prism poles with 5/8-11 male threads on the bottom of the pole, has a removable plumb bob tip. Additional points available 6000-002

SECO GPS Quick-Release Adapter Stainelss Steel

Female 5/8 x 11 with quick release tip. Adds 23.8 mm to length of rod. Weighs 0.06 lb (0.03 kg)

SECO GPS Quick Disconnect Adapter TP

BrassGPS Quick Disconnect Adapter TP

SECO Adapter for Right Angle Prisms to 5/8 x 11 Thread

SECO Rover Rod, 5/8-11 GPS 5125-00-GT

This two-meter rod has a 40-minute circular vial, vinyl handgrip, and replaceable steel point. OUTER GRADS

SECO Geodimeter Style Telescoping Prism Pole Feet Metric

See product video here Small in diameter (20 mm) this light weight prism poleis designed to work with the Geodimeter style sliding prism. It is an excellent pole/prism configuration for all survey applications. The prism can be mounted on the site rod or the graduated outer section. The telescoping section is graduated in feet and centimeters and collapses to 4.80 ft (1.46 m) and expands to 8.60 ft (2.62 m). The graduations in feet, 10ths and 100ths are on the outer section for direct reading of prism height. The site rod can be used as a short hand held rod with two height marks, 0.50 ft (15.24 cm) and 1.00 ft (30.48 cm). It comes witht he QLV locking mechanism with a 40-min circular, adjustable vial. This pole also comes with two diameter adapters for bipods and data collector attachment. This pole has a hardened steel removable point. It is painted bright fluorescent orange. Weighs 2.75 lb (1.24 kg)

SECO Geodimeter Style Telescoping Prism Pole Metric

SECO Thread Adapter 1 Inch long 5/8 x 11

DE Laser Rod Bracket for SECO Rods Sokkia LR100390, LRP3A3C

WORKS WITH ALUMINUM DE RODS ONLY! Bracket for LR100390, LRP3A3C, SOKKIA Weighs 0.4 lb (0.18 kg) For use with SECO 7501-20 and 7601-20 laser rods.

SECO Incite Front Locking Prism Assy Alum Can Yellow Black

This new version of the Incite 3050 Series Prism Assembly features an all metal tilting prism holder with an improved front locking lever design and target. The prism is 58 mm in diameter with silver coating to protect against moisture, fogging, and severe climate conditions. The prism is made of fine optical glass and has a beam deviation of

SECO Incite Front Locking Prism Assy Alum Can Flo Yellow Black

SECO Incite Front Locking Prism Assy Alum Can Flo Orange Black

SECO Incite Front Locking Prism Assembly Flo Yellow Black

This new version of the Incite 3015 Series Prism Assembly features an all metal tilting prism holder with an improved front locking lever design and target. The prism is 58 mm in diameter with silver coating to protect against moisture, fogging, and severe climate conditions. The prism is made of fine optical glass and has a beam deviation of

SECO Incite Front Locking Prism Assembly Yellow Black

SECO Tilting Reflector with Printed Crosshair

The Small Tilting Reflector with Printed Crosshair is perfect for short-range measurements up to 150 m (492 ft) or where retrieving the reflector is not practical or economical. The Tilting Reflector with Printed Crosshair features a 60 mm diameter reflector. The yellow Delrin body features a 2 mm offset and is adjustable on two axes. Use with SECO Swiss-style adapters and Rebar Bolt (links at right). Weighs 0.15 lb (0.07 kg)

SECO Rebar Bolt with Female 3/8 x 16 Threads

The 3/4 x 9.9 inch (19.05 x 251.46 mm) Rebar Bolt is used to anchor SECO tilting reflectors (or the 6600-04 Tilting Mini Prism) in soft materials like sandstone. The Rebar Bolt comes with a hex bolt on one side. Pound the Rebar Bolt in to the soft material with the hex bolt facing out. When the Rebar Bolt is in place, remove the hex bolt to expose the 3/8 x 16 threads. Screw in the SECO 6601-02 Swiss-style Quick-Release Adapter and attach your choice of SECO Tilting Reflector (or the 6600-04 Tilting Mini Prism).

SECO GPS Quick-Release Adapter

Female 5/8 x 11 with quick release tip. Adds 23.8 mm to length of rod. Weighs 0.06 lb (0.03 kg)

SECO Small Tilting 25 mm Mini Prism

The 6600-04 Small Tilting 25 mm Mini Prism is constructed of yellow Delrin and operates on two axes just like the 6600-01 and 6600-03. Unlike the other two models however, this model features a 25 mm mini prism in place of the reflector material. The prism has a -17.5 mm offset. The mini prism allows for ranges up 2,000 ft (600 m) or more with most instruments. Use with SECO Swiss-style adapters and Rebar Bolt (links at right).

Swiss-Style Quick-Release Adapter with M8 Threads

Swiss-Style Quick-Release Adapter withM8 Threads The 6601-03 stainless steel (T-303) adapter features a Swiss-style quick-release tip andM8 threads.

Swiss-Style Quick-Release Adapter with 3/8 x 16 Threads

Swiss-Style Quick-Release Adapter with3/8 x16 Threads The 6601-02 stainless steel (T-303) adapter features a Swiss-style quick-release tip and 3/8 x16 threads.

Swiss-Style Quick-Release Adapter with 1/4 x 20 Threads

Swiss-Style Quick-Release Adapter with 1/4 x 20 Threads The 6601-01 stainless steel (T-303) adapter features a Swiss-style quick-release tip and 1/4 x 20 threads.

CST Berger Battery CHarger (NiMH)

CST Berger Dock Station - Desktop charger for LM800 series

Uses your original charger to allow a drop in dock for charging additional batteries outside of the LM800 laser. Does not inlcude battery or charger, just the cup style docking station.

Bosch Digital Laser Range Finder Kit

Pocket-Sized Only 4 tall Four Measuring Reference Points - Back, front, swingout extension pin for measuring from inside corners or channels, or center of optional tripod Three Measurement Systems Feet and inches, decimal feet, and metric Length, Area and Volume Measuring Capability Continuous Measurement Mode Measurement automatically adjusts when walking-off distances Continuous Laser Mode Reduces the number of key strokes when making rapid sequence of measurements Indirect Length Measurement Mode Calculates inaccessible distances that cannot be measured directly due to obstruction or lack of reflecting surface using Pythagorean theorem (a2 + b2= c2) Ergonomic Soft-Grip Area For sure grip and comfort

SECO Tripod Radio Antenna Bracket

SECOs tripod radio antenna bracket allows tandem mounting of large or small GPS and radio antennas to your tripod. Use in conjunction with SECOs radio antenna adapter (2133-00) . Weight: .5 lbs (23 kg)

SECO Tribrach Adapter, Quick Release to Bayonet

ADAPTER, QUICK RELEASE TO BAYONET

SECO Tribrach Adapter, 5/8-11 to Bayonet

ADAPTER, 5/8-11 TO BAYONET

Leica GEB 221 Replacement Battery

Replace Leica Battery Contains Specially Designed Internal Circuity to Work withLeicaEquipment Long Lasting, Highest Capacity Fits Old and New Models Works on Other Chargers Environmentally Friendly 4800 mAh Field Tested Leica GEB 221

Leica GEB 211 Replacement Battery

Magellan Mobile Mapper 6 12 Volt Power Adapter

Magellan Mobile Mapper 6 cigarette lighter power adapter, fastens to back of MM6, also snaps into windshiled mount.

HL300 Laser Level with LD350 Receiver from SECO

HL300 Laser Level with LD350 Receiver from SECO Fully automatic leveling provides fast and accurate setups. Self-Leveling range of 5 with an operating range up to 1,000 ft diameter. Laser Accuracy is

Sokkia PL1 First-Order Precision Tilting Level

0.2mm standard deviation for 1km double-run leveling. The PL1 is specially designed for the most precise leveling tasks. No exchanges on this product, special order only. PL1 First-Order Precision Tilting Level Telescope magnification 42x Objective aperture 50mm (2.0in.) Minimum focus 2.0m (6.6ft.) Standard deviation for 1km double-run leveling 0.2mm (0.0008in.) with micrometer Main level sensitivity 10 / 2mm

SI USA 2-Meter Carbon Fiber Snap Lock Rover Rod

STAKEMILL 2-METER CARBON FIBER SNAP-LOCK GPS ROVER ROD POLE Rod telescopes and snaps into position at 2 m eters and collapses to 1.35 meters Spring loaded push-buttons allow quick snap into position Collet - type compression locking mechanism Inner and outer poles are all Carbon F iber providing high strength yet extremely light weight Outer pole diameter is a standard 1.25 5/8-11 mounting thread Compatible with all SI pole clamps and cradles 40 minute vial bubble level with top adjust Includes our replaceable lightweight p oint with stainless steel tip A ircraft grade c onstruction SI Precision exclusive carbon graphite material is the strongest and most durable available in this industry Standard color for CARON FIBER is BLACK N ET WEIGHT: 1. 56 lbs (0.7kg)

12 Ft Carbon Fiber Adj Tip Prism Pole w/ Snap Lock SI-4624

MADE INTHE USA 12Foot Lightweight Carbon Fiber Adjustable Tip Prism Pole w/ Snap Lock 12FT Pole Us er fri e ndly lever lock mechanism O ne hand operation Super lightweight and durable CARBON FIBER outside pole Precision CNC Marked Graduations will not fade or rub off 40 minute top-adjust vial bubble level Fine threaded precise tip allows for precision height adjustment Stainless Steel Tip Points, Ultra light weight corrosion resistant hybrid design A lso a vailable in powder coated Aluminum with Red/white bands, Orange, and Yellow Net Weight:

3.6M Carbon Fiber Adj Tip Prism Pole w/ Snap Lock SI-4626

MADE INTHE USA 3.6meterLightweight Carbon Fiber Adjustable Tip Prism Pole w/ Snap Lock Meter Graduations 3.6M Retractable Prism Pole Us er fri e ndly lever lock mechanism O ne hand operation Super lightweight and durable CARBON FIBER outside pole Precision CNC Marked Graduations will not fade or rub off 40 minute top-adjust vial bubble level Fine threaded precise tip allows for precision height adjustment Stainless Steel Tip Points, Ultra light weight corrosion resistant hybrid design A lso a vailable in powder coated Aluminum with Red/white bands, Orange, and Yellow Net Weight:

2.5M Carbon Fiber Adj Tip Prism Pole w/ Snap Lock SI-4622

MADE INTHE USA 2.5 meterLightweight Carbon Fiber Adjustable Tip Prism Pole w/ Snap Lock Meter Graduations 2.5M Retractable Prism Pole Us er fri e ndly lever lock mechanism O ne hand operation Super lightweight and durable CARBON FIBER outside pole Precision CNC Marked Graduations will not fade or rub off 40 minute top-adjust vial bubble level Fine threaded precise tip allows for precision height adjustment Stainless Steel Tip Points, Ultra light weight corrosion resistant hybrid design A lso a vailable in powder coated Aluminum with Red/white bands, Orange, and Yellow Net Weight:

8 Ft Carbon Fiber Adj Tip Prism Pole w/ Snap Lock SI-4620

MADE INTHE USA 8 Foot Lightweight Carbon Fiber Adjustable Tip Prism Pole w/ Snap Lock 8.5FT / 2.5M Retractable Prism Pole Us er fri e ndly lever lock mechanism O ne hand operation Super lightweight and durable CARBON FIBER outside pole Precision CNC Marked Graduations will not fade or rub off 40 minute top-adjust vial bubble level Fine threaded precise tip allows for precision height adjustment Stainless Steel Tip Points, Ultra light weight corrosion resistant hybrid design A lso a vailable in powder coated Aluminum with Red/white bands, Orange, and Yellow Net Weight:

Magellan Mobile Mapper 6 AC Power Adapter

This is the OEM power adapter that allows the included USB cable to power Mobile Mapper 6 from the wall with included adapters.

Magellan Mobile Mapper 6 to USB Cable

This is the OEM cable that screws to back of Mobile Mapper 6 and allows you to connect to a PC or the Magellan 110 Wall Adapter.

Magellan Mobile Mapper 6 External GPS Antenna

This is the OEM version antenna needed to allow Post Processing and helps receivers located in the cabs of equipment locate the satellites. An inexpensive yet sensitive external GPS antenna for the MobileMapper 6 GPS receiver. Magnetic base, with 3-meter (9.85 feet) coax cable. While the MobileMapper 6 has a great internal antenna which is very sensitive, adding an external antenna for use in a vehicle will make a noticeable improvement in accuracy. An external antenna will improve performance of the hand held under canopy and when hand held such that the receiver's view of the sky is blocked by yourbody, tree or structure.

SVR Surveyor Series Grade Rods SVR 25 Metric Weekly Rental

Weekly rental ofMetric Grade Rod Our SVR Series Leveling Rods have a rectangular-oval shape, flat on the front and back with round corners. This convenient shape prevents the scale from rolling, making observation much easier. The rods are also water-proof, corrosion-resistant, and non-conductive. The SVR Series rods have a measuring scale on the back (with the exception of the two-scaled rods) that allow the user to read overall height measurements at eye level, which is useful in making clearance and height measurements. Also on the back-side with the measuring scale, there are alternate 1 red and white markings that are suitable for stadia purposes. The newly redesigned locking mechanism now features round buttons. Tight and accurate, the lock is specifically designed to resist jamming from sand and dirt. Disassembly is quick and easy. Simply press the lock buttons and pull the sections out. To further disassemble, a Phillips screwdriver is needed. The thread in the top section of the SVR is x 20, but can be adapted to 5/8 x 11 by purchasing an adapter. Brackets are needed to attach laser sensors to the SVR Series. Reading the Measuring Scale: To read the measuring scale on the USL , the height measurement is read at the top of the base section. To read the measuring scale on the New and Original SVR, the height measurement is read at the top of the first unextended section.

Wallmount for the ML-450N 47-5303N

Ceiling/Wall Mount Aids in the installation of drop ceilings, remodeling, and more! Features 5/8 x 11 mounting stud, inch/cm graduations, and durable construction.

Elan 6 Ring Binder for Filler Pages Poly

Elans Poly bider - has 6 rings to fit an assortment of filler pages by Elan Below photo shows filler pages - not included with binder, order refills from Stakemill.com

Metal Replacement Faces for Philadelphia Rods Inches

Metal Replacement Faces for Philadelphia Rods All Philadelphia rods are dual-faced with black foot marks and instant reading numbers in bright red for fast and easy location. Rods are supplied with two replaceable faces featuring a high-contrast white background. Item may drop ship from manufacturer

NEDO Lumiscale Vehicle Charger for Digital Grade Rod

NEDO,headquartered in Germany, Nedo is today Europe's leading survey accessory manufacturer. Vehicle charger for Nedo Illumiscale NiMH battery

Lumiscale Self Illuminating Bar Code Rod Sokkia

NEDO,headquartered in Germany, Nedo is today Europe's leading survey accessory manufacturer. Lumiscale is a self-illuminating bar code rod for digital levels and intended for use in extreme low light situations. Lumiscale graduations are backlight via an electroluminescent foil which illuminates all graduations without any shading. Features: Illuminated graduations and circular bubble Supplied with NiMH battery, charger and carrying bag Operation duration is 8 hours Vehicle charger is also available Bar Codes available Leica, Sokkia, Topcon and Trimble Digital Levels

Lumiscale Self Illuminating Bar Code Rod Topcon RAB

Lumiscale Self Illuminating Bar Code Rod Leica DNA

Lumiscale Self Illuminating Bar Code Rod Trimble

NEDO Leica Style Prism -34mm Offset

NEDO, with headquarters in Germany, Nedo is today Europe's leading survey accessory manufacturer.

Road Runner Dual Wheel Paint Applicators RRPA182

Road RunnerPaint Applicators Its easy to measure curved, horizontal and asymmetrical surfaces. Weighs less than 2 pounds. Measures 9,999 feet, 11 inches (or 9/10ths of a foot with engineers models) without resetting. Three-section handle telescopes up to 38 inches so you can measure without bending. Handle telescopes down to 17 inches to fit into a toolbox or standard briefcase. Adds while rolling forward and subtracts when pulled in reverse. MODEL UPC UNITS DIAMETER CIRCUMFRENCE RRPA18 022298 1- foot w/applicator RRPA182 020768 2 wheel w/applicator May drop ship from supplier

RoadRunner Long Distance Wheels RR30M Keson 36 Kesonite

Metricversion Made of Kesonite There are inherent vulnerabilities of die cast and metal spoked wheels. Everyday use requires that a wheel handle some rough treatment without dents and without bending. Not all wheels are up to this. Our solution? Invent a new material. Kesonite is a strong, dense metal/resin composite. It holds its shape better than metal and its stronger than a spoked or die cast wheel. The weight of the wheel makes it easier to use and more accurate in rough terrain. Based on the design of the RR318N - a model with over 12 years of continuous improvementIncludes a NEW wheel design, material and safety reflector! 5-digit, easy-read, magnified counter measures 9,999 feet, 11 inches without resetting. Thats almost two miles.

RoadRunner Long Distance Wheels RR3010 Keson 36 Kesonite

Survey version in 10ths Made of Kesonite There are inherent vulnerabilities of die cast and metal spoked wheels. Everyday use requires that a wheel handle some rough treatment without dents and without bending. Not all wheels are up to this. Our solution? Invent a new material. Kesonite is a strong, dense metal/resin composite. It holds its shape better than metal and its stronger than a spoked or die cast wheel. The weight of the wheel makes it easier to use and more accurate in rough terrain. Based on the design of the RR318N - a model with over 12 years of continuous improvementIncludes a NEW wheel design, material and safety reflector! 5-digit, easy-read, magnified counter measures 9,999 feet, 11 inches without resetting. Thats almost two miles.

Magellan MobileMapper 6 Survey GPS FAST Survey

WHY BUY FROM STAKEMILL? - We will provide free software with Mobile Mapping units to get you up and running right out of the box. All units ship fully functioning - We inlcude at no additional cost to you the following programs pre installed: Magellan Office (runs on desktop PC) Magellan Mobile Mapper Today ESRI's ArcPad 7.11 (requires additional unlock code purchase) Magellans Mobile Mapping (requires additional unlock code purchase) Magellans White Papers and Technical Notes Adobe Mobile Reader See the video Case Study Fast Survey Software Info Sheet FAST SURVEYSOFTWARE INCLUDED (Not the Magellan Mobile Mapping Version ) MM6 Unit Stylus set AA batteries USB Cable CD Rom FAST Survey FAST Survey TM software is a graphical field solution designed to optimize the functionality and performance of the Magellan GPS systems r topography and construction. FAST Survey provides innovative, flexible support for a wide range of instruments and data formats. Graphical Displays FAST Survey is a graphical, easy-to-use field solution. A scaleable map view displays points and lines as they are surveyed, offering large-print controls for rapid, reliable data collection. Menu access through an intuitive tab-based interface means that mission critical menus are visible from all screens and no time is spent scrolling through menus in the field. FAST Survey software is included in the complete Z-Max.Net system; it is an option in the new ProMark3 RTK system and now can be used on the Mobile Mapper 6. H ighlights of the MobileMapper 6 is that it uses a Windows Mobile operating system. This will allow for compatibility of third party software. Other features include a IPX6 waterproof, integrated camera, flashlight, barometer, compass and large SD storage capacity. We currently have three GIS field application with Post processing capability, Arcpad, Mobilemapper and Digiterra Explorer. Easy-to-use professional GPS/GIS handheld receiver.Contains a full set of mapping features including mobile mapping software andan integrated digital camera. MobileMapper 6 is an affordable easy-to-use, professional GPS/GIS handheld receiver. It provides a complete set of all necessary features required by a mapping device for anyone who needs productive data collection. MobileMapper is an SBAS enabled high-sensitivity GPS receiver which continuously tracks up to 12 satellites to compute and update your position even in difficult conditions, such as under tree canopy and urban surroundings. You can collect GIS/GPS points and maps via the GIS application of your choice, navigate, communicate wirelessly via Bluetooth, take pictures using the integrated 2 megapixel digital camera, use Windows Office Mobile applications, all with a single device. MobileMapper 6 fits comfortably in one hand and weighs less than eight ounces (224g). MobileMapper 6 is made for intensive use and can be dropped in the dirt or into water again and again. It keeps working, and you wont lose any data. Features: Rugged and waterproof to IPX7 Windows Mobile 6 High-sensitivity GPS 2 megapixel digital camera Bluetooth connectivity SD card slot QVGA colour touch screen Embedded speaker and microphone Update Rate (Hz) 1 Hz Real-time Accuracy 2 5 m Channels 12 (L1) User Selectable standard datums Yes User-definable datums Yes Antenna Type Internal external Unit Height (inches) 5.75 Unit Width (inches) 2.5 Unit Depth (inches) 1.13 Weight (g) 224 g Data Storage 64 MB SDRAM, 128 NAND Flash memory, SD Card up to 4 GB OS Windows Mobile 6 Processor 400 MHz Shock 1 meter drop to concrete Bluetooth Yes Temp Min (C) -20 Temp Max (C) 50 Waterproof IPX7 Post-Processed Accuracy Available 2009 MobileMapper 6 MobileMapper 6 Getting Started Guide Mobile Mapping for MobileMapper 6 Getting Started Guide MobileMapper 6 FAQ's BONUS SOFTWARE INCLUDED STAKEMILL is the only one to include plug-in enhancement that delivers a range of general-purpose productivity tools accessible each time the Mobile Mapper 6 is switched on. These tools include quick access to hardware features such as the built in flashlight, camera, GPS and E-Compass. It also monitors your system clock, detecting if the power loss has reset the clock to an invalid time. The clock can then be updated using the built in GPS to almost atomic clock accuracy, plus when you sync to your desktop you can then correct the desktop PC as well. We also include PC desktop software to allow you full control over handheld from your PC while connected to your PC. True Mobile GIS for Everyone. MobileMapper 6 provides a complete set of all necessary features required by a mapping device for anyone who needs productive data collection and efficient asset management in the field. Unlike consumer-grade units, the low-cost easy-to-use MobileMapper 6 offers full compatibility with popular GIS software to enable companies to select and use GIS software of choice. With MobileMapper 6, Magellan innovates and fills a market gap in GIS data collection between high-cost devices and consumer-grade products. Features Extremely rugged and waterproof to IPX7 standards SiRFstarIII delivers fast GPS position acquistion (NMEA, 12 channel) 2.0 megapixel digital camera. Use the digital camera to capture images of the collected data Built-in loudspeaker. Play and listen to voice notes USB Data connector. Connect your USB data cable for PC communication Battery compartment. 2 x AA batteries for easy replacement in the field Bluetooth technology for wireless communication Flashlight button. Use the LED flashlight button to change the screen backlight level and turn the Flashlight On and Off Earphone output. Audio jack for standard stereo wired headset SD Card Slot. Large SD card storage capability to keep your GIS raster maps, photos and videos on hand. Hold slide switch. Lock the device keypad and key functions. Integrated, low-power, high-sensitivity antenna. Clear reception andlonger battery life. Delivers fast GPS position acquisition. Windows Mobile 6 Operating System. Email messaging, Internet Explorer, Office Mobile, Pictures Video Viewer ... Zoom + Zoom - buttons. Zoom in (less area, more detail) or out (more area, less detail) on the map. Log button. Use the Log button to start and stop GPS points logging Touch screen stylus. Use the stylus for easy touch screen navigation and handwriting recognition Performance GPS This SBAS enabled high-sensitivity GPS receiver continuously tracks up to 12 satellites to compute and update your position (2-5m accuracy) even in difficult conditions, such as under tree canopy and urban surroundings. Versatile Mobile GIS Solution The MobileMapper 6 comes with Microsoft Windows Mobile 6, a color touch-screen and has Bluetooth for wireless connectivity. You can collect GIS/GPS points and maps via the GIS application of your choice, navigate, and communicate wirelessly. Field-proven Design Fits comfortably in one hand and weighs less than eight ounces (224g). MobileMapper 6 is made for intensive use and can be dropped in the dirt or into water again and again. It keeps working, and you wont lose any data. Unlimited Memory With SD card storage, keep GIS raster maps, photos, videos, and any other data on hand and never worry about running out of memory in the field. Feature-rich GPS Embedded speaker and microphone make it easy to record audio files, for a rich archive of locations and projects. You can also take pictures using the integrated 2-megapixel digital camera, use Windows Office Mobile applications, all with a single device. EMBARGOED COUNTRIES THE UNITED STATES OF AMERICA LAW PROHIBITS THE DISPOSITION OF THESE COMMODITIES TO CUBA, IRAN, IRAQ, LIBYA, NORTH KOREA, SUDAN AND SYRIA UNLESS OTHERWISE AUTHORIZED BY A UNITED STATES GOVERNMENT EXPORT LICENSE.IT IS UNLAWFUL TO RECEIVE OR KNOWINGLY RE-EXPORT THESE COMMODITIES FOR ANY USE INVOLVING NUCLEAR, CHEMICAL, BIOLOGICAL WEAPONS OR BALLISTIC MISSILES.

Magellan Mobile Mapper 6 Windshiled Mount

Suction cup style windshield mount for Magellan Mobile Mapper 6. Double articulation bracket allows for use on flat or slanted windscreens along with horizontal mounting. Unique tab system grips the Magellan Mobile Mapper 6 in it's factory cutout locations assuring a rock solid grip. On the cradle is a hole and groove that provides the convieniece of using the MobileMapper 6 USB cable while securing and placing the cable out of your way. Included with the mount is a non-poris disc that can be placed onto any surfaces that aren't compatible for the suction cup. For a more secure mounting system, see our cradle style bracket and pole clamp system .

NEDO 5M 5 Sect Rod Metric E BLock 345115-613

Made in Germany NEDO 5M 5 Sect Rod Metric E BLock 345115-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO 4M 4 Sect Rod Metric E BLock 344115-613

Made in Germany NEDO 4M 4 Sect Rod Metric E BLock 344115-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO 16 Foot 5 Sect Rod Feet/10ts 345185-613

Made in Germany NEDO 16 Foot 5 Sect Rod Feet/10ths 345185-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO 16 Foot 5 Sect Rod Feet/Inches 345186-613

Made in Germany NEDO 16 Foot 5 Sect Rod Feet/Inches 345186-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO 13 Foot 4 Sect Rod Feet/Inches 344186-613

Made in Germany NEDO 13 Foot 4 Sect Rod Feet/Inches 344186-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO 13 Foot 4 Sect Rod Feet/10ths 344185-613

Made in Germany NEDO 13 Foot 4 Sect Rod Feet/10ths 344185-613 Nedo aluminum leveling rods set standards interms of stability. Extra strong aluminum profiles combined with metal enforced buttons make them perfect for the use on the construction site or in the field. FEATURES Extra strong aluminum profiles Metal enforced buttons Different scales available Scale on back allowing overall height readings Snap-on rod level available as an accessory

NEDO Snap-On Rod Level 350 217

NEDO Snap-On Rod Level 350 217 Snap-on rod levels are a great help to set up Nedo leveling rods truly upright.

NEDO 25 Foot 5 Sect F/G Rod Feet/10ths w/bag and level 347885

Made in Germany NEDO25 Foot5 Section F/G Rod Feet/10ths w/bag and level 347885 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 16 Foot 5 Sect F/G Rod Feet/Inches w/bag and level 345886

Made in Germany NEDO 16 Foot5 Section F/G Rod Feet/Inches w/bag and level 345886 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 16 Foot 5 Sect F/G Rod Feet/10ths w/bag and level 345885

Made in Germany NEDO 16 Foot5 Section F/G Rod Feet/10ths w/bag and level 345885 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 13 Foot 4 Sect F/G Rod Feet/Inches w/bag and level 344886

Made in Germany NEDO 13 Foot4 Section F/G Rod Feet/Inches w/bag and level 344886 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 13 Foot 4 Sect F/G Rod Feet/10ths w/bag and level 344885

Made in Germany NEDO 13 Foot4 Section F/G Rod Feet/10ths w/bag and level 344885 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 10 Foot 3 Sect F/G Rod Feet/Inches w/bag and level 343886

Made in Germany NEDO 10 Foot 3 Section F/G Rod Feet/Inches w/bag and level 343886 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO 10 Foot 3 Sect F/G Rod Feet/10ths w/bag and level 343885

Made in Germany NEDO 10 Foot 3 Section F/G Rod Feet/10ths w/bag and level 343885 Nedo fiberglass leveling rods are made to last. The tubes are made of high impact fiberglass materials which are extremely durable and robust. Anti-Jam buttons made of brass and wear resistant graduations on the front and back ensure a long life of Nedo fiberglass leveling rods, even under tough conditions. Features: Extremely robust design Anti-Jam buttons made of brass High precision scale on front and back Scale on back allowing overall height readings Ergonomically designed shape for a better grip Non-conductive (under dry conditions) Laser receiver brackets are easily attachable Carrying bag and snap-on bubble included as a standard

NEDO Wood Fiberglass tripod w/ Quick Clamp 200520-613

Made in Germany Stability of Tripods The impact of tripods on the accuracy of measuring results is often underestimated. The degree of accuracy and precision can only be achieved with a combination of high-quality tripods and high-precision instruments. Wood or Aluminum? The most precise measuring results can be reached by using a wooden tripod. In com parison to aluminum tripods, wooden tripods feature a better damping behavior and are less affected by temperature changes. For heavy-duty wooden tripods, Nedo uses only ash, a particularly hard-wearing wood with excellent material properties. Geodesists prefer the use of wooden tripods because of the superior material properties, whereas aluminum tripods are mostly used on construction sites, as they are light in weight and extremely hard-wearing. Details which matter Brass hinge pins are very robust and can withstand the surrounding load without any problems. Nedo tripods are equipped exclusively with brass hinge pins. Cheaper makes of tripods are usually equipped with dowels made of aluminum die casting or plastic which break under littlest stress. Quick-clamping levers on Nedo tripods are made of a high-tech plastic or aluminum die casting whereby Nedo has selected materials which are extremely hard-wearing and unbreakable. Cheaper makes of tripods are often produced with inferior materials which might look the same, but are of inferior quality and break very easily. The hooks for plumb bobs on all Nedo tripods can be moved sideways to allow workto be carried out with an optical plummet or a laser plummet. Tightening Screws The tripods are equipped with a 5/8 threaded retaining screw. The threads on all instruments and tripods are standardized.

NEDO Budget HD Aluminum Tripod 200200-613

Made in Germany FEATURES Strong aluminumextension legs, silver anodized Break-proof aluminum quick release levers Brass hinge pins for extra stability Tripod feet made of high-tech material with steel points SUITABLE FOR Builders' levels Rotating lasers Ref.-No. 200200-613 Min. effective height approx. 39 Max. effective height approx. 50 Retracted length approx. 42 Weight 9 lbs. Tripod head flat , 4.5 Thread 5/8 x 11

NEDO Medium-Duty Elevating Tripod 210612-185

Made in Germany Every Nedo elevating tripod features the same high standard of quality as our proven wooden and aluminum tripods. Thanks to the elevating mechanism, even heavy-duty lasers or machine control lasers can be easily lifted to the desired height and smoothly adjusted. Double telescopes offer an extremely wide working range. Unique features such as Nedo Slip Guard which prevents the tripod legs from spreading on smooth ground and quick release levers made of aluminum are a standard on every Nedo elevating tripod. FEATURES Direct gear unit for easy height adjustment of the laser Anodized scale on elevating column Circular bubble for easy set-up of the laser Slip-Guard for a secure stand Break-proof aluminum quick release levers SUITABLE FOR All construction lasers for interior and outdoor work Ref.-No. 210612-185 Min. effective height approx. 44 Max. effective height approx. 93 Retracted length approx. 48 Weight 12 lbs. Thread 5/8 x 11

NEDO Heavy-Duty Elevating Tripod 210670-185

Made in Germany Every Nedo elevating tripod features the same high standard of quality as our proven wooden and aluminum tripods. Thanks to the elevating mechanism, even heavy-duty lasers or machine control lasers can be easily lifted to the desired height and smoothly adjusted. Double telescopes offer an extremely wide working range. Unique features such as Nedo Slip Guard which prevents the tripod legs from spreading on smooth ground and quick release levers made of aluminum are a standard on every Nedo elevating tripod. FEATURES Direct gear unit for easy height adjustment of the laser Double telescope for a large working range Anodized scale on elevating column Circular bubble for easy set-up of the laser Slip-Guard for a secure stand Combi-Shoes for all-terrain use Break-proof aluminum quick release levers SUITABLE FOR All construction lasers for interior and outdoor work Ref.-No. 210670-185 Min. effective height approx. 34 Max. effective height approx. 112 Retracted length approx. 44 Weight 15 lbs. Thread 5/8 x 11

NEDO Extra Heavy-Duty Elevating Tripod 210680-185

Made in Germany Every Nedo elevating tripod features the same high standard of quality as our proven wooden and aluminum tripods. Thanks to the elevating mechanism, even heavy-duty lasers or machine control lasers can be easily lifted to the desired height and smoothly adjusted. Double telescopes offer an extremely wide working range. Unique features such as Nedo Slip Guard which prevents the tripod legs from spreading on smooth ground and quick release levers made of aluminum are a standard on every Nedo elevating tripod. FEATURES Indirect gear unit for easy height adjustment of the laser Double telescope for a wide working range Additional leg struts for extra stability Circular bubble for easy set-up of the laser Break-proof aluminum quick release levers Ref.-No. 210680-185 Working range 33 - 119 Length retracted 52 Weight 19 lbs. Thread 5/8 x 11

NEDO Giant Elevating Tripod 210442-185 13 Foot Range

Made in Germany Every Nedo elevating tripod features the same high standard of quality as our proven wooden and aluminum tripods. Thanks to the elevating mechanism, even heavy-duty lasers or machine control lasers can be easily lifted to the desired height and smoothly adjusted. Double telescopes offer an extremely wide working range. Unique features such as Nedo Slip Guard which prevents the tripod legs from spreading on smooth ground and quick release levers made of aluminum are a standard on every Nedo elevating tripod. FEATURES Working height up to 13' Indirect gear unit for easy height adjustment of the laser Double telescope for a wide working range Additional leg struts for extra stability Anodized scale on elevating column Circular bubble for easy set-up of the laser Dual clamp for extra stability Break-proof aluminum quick release levers Ref.-No. 210442-185 Min. effective height approx. 70 Max. effective height approx. 157 Retracted length approx. 74 Weight 25 lbs. Thread 5/8 x 11

NEDO Short Medium-Duty Tripod 200 631

Made in Germany FEATURES Strong aluminumlegs, silver anodized Break-proof aluminum quick release levers Brass hinge pins for extra stability Tripod feet made of high-tech material with steel points SUITABLE FOR Rotating lasers Builders' levels Pipe Lasers Ref.-No. 200 631 Min. effective height approx. 23 Max. effective height approx. 33 Retracted length approx. 24 Weight 7 lbs. Tripod head flat , 5.5 Thread 5/8 x 11

NEDO Surveyors Grade Aluminum Tripod 200 524-185

Made in Germany FEATURES Big round tripod head for easyinstrument set-up Strong aluminum extension legs, silver anodized Break-proof aluminum quick release levers Brass hinge pins for extra stability Snap Cap to protect tripod head Carrying strap for easy handling Replaceable points made of hardened steel SUITABLE FOR Optical levels Builders' theodolites Total stations Rotating lasers Ref.-No. 200 524-185 Min. effective height approx. 41 Max. effective height approx. 67 Retracted length approx. 45 Weight 14 lbs. Tripod head flat , 6.5 Thread 5/8 x 11

NEDO Heavy-Duty Aluminum Tripod 200 200-185

Made in Germany FEATURES Strong aluminumextension legs, silver anodized Break-proof aluminum quick release levers Brass hinge pins for extra stability Tripod feet made of high-tech material with steel points SUITABLE FOR Builders' levels Rotating lasers Ref.-No. 200 200-185 Min. effective height approx. 42 Max. effective height approx. 67 Retracted length approx. 45 Weight 12lbs. Tripod head flat , 5.5 Thread 5/8 x 11

NEDO Medium-Duty Aluminum Tripod 200 621

Made in Germany FEATURES Strong aluminumextension legs, silver anodized Break-proof aluminum quick release levers Brass hinge pins for extra stability Tripod feet made of high-tech material with steel points SUITABLE FOR Builders' levels Rotating lasers Ref.-No. 200 621 Min. effective height approx. 39 Max. effective height approx. 65 Retracted length approx. 42 Weight 9 lbs. Tripod head flat , 5.5 Thread 5/8 x 11

NEDO E T R Laser Rod

Made in Sitzerland Save time on every CUT FILL operation on the construction site. The Nedo ETR Laser Rod is the perfect accessory for your rotating laser to increase the efficiency of your work. Working with the ETR Laser Rod is child's play: Attach laser receiver to ETR Laser Rod Position detector in plane of rotating laser by means of telescopic sections Read off height on analog display of ETR Laser Rod when detector emits a continuous tone A measuring range of almost 17' facilitates even complex excavating jobs. Your rotating laser and the Nedo ETR Laser Rod are a perfect match to cut your costs and fill your needs. Nedo ETR Laser Rod is perfect for: Grading Excavating Building concrete floors Features: Extra strong, anodized aluminum profiles Integral measuring tape Integral circular bubble for upright set up Display at eye level Extended length adjustable with thumb screws Easy to use Proven durable design Quality made in Switzerland Technical Data: Scale feet, 10ths Measuring range 4.5' to 16.96' Weight 6 lbs. Ref.-No. F 687 511-185

NEDO Quick-Fix Instrument Quick Release

Quick-Fix is an innovative accesory for fastening an instrument quickly and securely in a tripod. Once Quick-Fix is installed, an instrument or a laser can be locked on a tripod and released simply by throwing a lever. Again and again - quick, easy and reliable. Quick-Fix fits any tripod and instrument. BENEFITS: Significantly speeds up the process of setting up an instrument Reduces the risk of dropping an instrument during set-up Allows quick removal of instrument during fowl weather without haing to re-setup tripod and instrument. Eliminates possibility of theft, when leaving job site or when equipment is out of view, simply throw the lever and remove instrument allowing you to store in vehicle when leaving for lunch or in high risk areas.

NEDO Surveyors Grade Wooden Tripod with Dual Clamps

Made in Germany FEATURES Plastic coated wooden legs ensure a long service life Dual Clamps Brass hinge pins for extra stability Replaceable points made of hardenedsteel Snap Cap to protect tripod head Carrying strap for easy handling SUITABLE FOR Optical and digital levels Theodolites Total stations Robotic total stations Laser scanners Ref.-No. 200 534-185 Min. effective height approx. 40 Max. effective height approx. 66 Retracted length approx. 44 Weight 17 lbs. Tripod head flat , 6.5 Thread 5/8 x 11

NEDO Surveyors Grade Wooden Tripod with Screw Clamp

Made in Germany FEATURES Plastic coated wooden legs ensure a long service life Screw Clamp Brass hinge pins for extra stability Replaceable points made of hardenedsteel Snap Cap to protect tripod head Carrying strap for easy handling SUITABLE FOR Optical and digital levels Theodolites Total stations Robotic total stations Laser scanners Ref.-No. 200 533-185 Min. effective height approx. 40 Max. effective height approx. 66 Retracted length approx. 44 Weight 17 lbs. Tripod head flat , 6.5 Thread 5/8 x 11

NEDO Surveyors Grade Wooden Tripod with Quick Clamp

Made in Germany FEATURES Plastic coated wooden legs ensure a long service life Quick Clamp Brass hinge pins for extra stability Replaceable points made of hardenedsteel Snap Cap to protect tripod head Carrying strap for easy handling SUITABLE FOR Optical and digital levels Theodolites Total stations Robotic total stations Laser scanners Ref.-No. 200 513-185 Min. effective height approx. 40 Max. effective height approx. 66 Retracted length approx. 44 Weight 17 lbs. Tripod head flat , 6.5 Thread 5/8 x 11

NEDO Heavy-Duty Wooden Tripod with Quick Clamp

Made in Germany FEATURES Plastic coated wooden legs ensure a long service life Break-proof aluminum quick release levers Brass hinge pins for extra stability Replaceable points made of hardened steel SUITABLE FOR Optical and digital levels Theodolites Total stations Ref.-No. 200 100-185 Min. effective height approx. 40 Max. effective height approx. 65 Retracted length approx. 43 Weight 12 lbs. Tripod head flat , 5.5 Thread 5/8 x 11

Leica Compatible 62.5mm Prism Replacement Items

REPLACEMENT ITEMS Leica Compatible 62.5mm Prisms Hermetically sealed 2-1/2 (62.5mm) copper coated prisms Tilting prism holder and target molded from impact-resistant Lexan Holder and yoke carry a three year warranty Color available: Black/Yellow < CST ITEMS 63-3014 Holder Yoke Only for 63-3010/63-3020

CST Mini Peanut Prism Only

The Peanut Pack is virtually indestructible under most working conditions, as it is precision-machined from die-cast aluminum then electrostatically powder-painted for a long-lasting and durable finish. One Year Warranty. Features: 1 (25.4mm) diameter prism, sealed in black anodized aluminum can Improved threaded can and ring with special O ring for sealing Precision prism ground up to 2 arc seconds Can's point permits measurement of corners (offset 0mm)

NEDO Topcon Style Prism Station

NEDO, with headquarters in Germany, Nedo is today Europe's leading survey accessory manufacturer. Topcon Style Prism Station Tilting prism with 0mm offset diopter and metal reflector, height adjustable tribrach adapter w/optical plummet tribrach with 5/8 thread, includes transport box

NEDO Base Plate (Turtle) for Grade Rod

NEDO Turtle Leveling Base Plates Gives you a stable platform to work with on sand, gravel, mud or snow

NEDO Tribrach without Optical Plummet

NEDO Tribrach with Optical Plummet Universal 5/8 base plate with forced-centering locking Color : Black

NEDO Tribrach with Optical Plummet

NEDO Tribrach with Optical Plummet Universal 5/8 base plate with forced-centering locking and optical plummet Color : Black

NEDO Leica Style Reflector Carrier

NEDO Leica Style Reflector Carrier Reflector carrier with Leica pin for prisms with Leica push-button mounting. Color : Green

NEDO Traverse Prism Tribrach Adapter w/ Optical Plummet

Traverse Prism Tribrach Adapter w/ Optical Plummet

NEDO Leveling Rod Prism Pole Level

The adjustable Nedo rod level can be attached to a leveling rod to ensure a true upright set-up. The accuracy of the rod level is 25'. Ref.-No. 471 212

NEDO Right Angle Prism

90 prism. Weight 0.9 oz. Ref.-No. 762 111

NEDO Double Penta Prism

Extra large field of view and foresight viewing. Field of view: 45. Mirror-coated top and bottom surfaces of prisms. Unobstructed central viewing between prisms. Rotary fastener. Weight: 1.8 oz.

Magellan Mobile Mapper 6 Carry Case

Carry case designed for the Mobile Mapper 6, includes a belt loop and elastic storage pocket inside.

OMNI Claw Quick Release Cradle Workabout Pro 37015-18

The Claw Series Quick-Release Controller/Collector Cradle Heres the next generation of qualityall-metal collector/controller cradles. The streamlined design of these new cradles fit the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an anti-crush feature that locks up the cradle when tight, but is limited the risk of damaging controller is greatly reduced. These new cradles are constructed of corrosion-resistant anodized aluminum and the stainless steel clamp screws feature non-jamming coarse threads for easy open and close use. The optional Claw Quick-Release Pole Clamphas the same features as the cradle; it cannot crush the pole and the stainless steel clamps screw threads are coarse for fast opening and closing. The cradle can be used with SECO Open Pole Clamps. For 1.25-inch (32-mm) diameter pole only.

OMNI Claw Quick Release Cradle GeoCE XH XT XM 37015-17

OMNI Claw Quick Release Cradle Archer, Carlson 37015-16

OMNI Claw Quick Release Cradle GMS-2 37015-15

OMNI Claw Quick Release Cradle FC-1000, FC-2000 37015-14

OMNI Claw Quick Release Cradle FC-100, MMCX, MMCE, Pro Mark 3

OMNI Claw Quick Release Cradle Recon 37015-12

OMNI Claw Quick Release Cradle Allegro Jett ce Explorer Tracker

OMNI Claw Quick Release Cradle TSC2, Ranger, 300X, 500X

OMNI Claw Quick-Release Pole Clamp Plain 37016-20

The Claw Series Quick-Release Controller/Collector Cradle The Claw Series is designed to not allow the user to overtighten the clamp screw and crush or crack the pole. The clamping function is limited so over-tightening cannot occur. These clamps are compatible with our existing cradle mounts for most popular data controllers. The clamps are designed to fit a pole diameter of 1.25 in (32 mm).

OMNI Claw Quick-Release Pole Clamp Compass 37016-24

OMNI Claw Quick-Release Pole Clamp Compass 40 Min Vial 37016-25

OMNI Claw Quick-Release Pole Clamp 40 Min Vial 37016-21

OMNI Claw Quick-Release Pole Clamp 8 Min Vial 37016-23

OMNI Claw Quick-Release Pole Clamp 20 Min Vial 37016-22

Crain Tri-Max Snap Head Cover Assembly

Tri-Max Snap Head Cover Assembly

Crain Tri-Max Tripod Snow Plate (Set of 3)

Snow plates widen foothold area for more secure planting in harder surfaces, like ice or snow. Tri-max feet have a dimple in the center of the foot pad. Drill out using a 3/8 inch bit and then attach bolt clamp from underneath. Place the plate over top and secure with screw knob. Weighs 2.17lb

Crain Tri-Max 5 Inch Points Set of 3 91702

For use in soft terrains, such as mud and swampy areas. the longer point allows for the tripod to be more firmly planted in the ground. Weight 0.9lb each

Explorer 600 Battery Pack 2500 Mah

551830 Explorer 600 Battery Pack 2500 Mah

JETTce / Explorer - NiMH Battery

NiMH Battery - JETTce / Explorer

MobileMapper 6 Office (post-processing) and Mobile Mapper S/W

This is for both codes Includes the unlock license for Post Processing Option for Mobile Mapping software on the Magellan Mobile Mapper 6 Includes the unlock license for Magellan's Mobile Mapping Software for use with either the Open Platform unit (990603) or the Arc Pad version (990603-51) The new MobileMapper 6 Office tool can be used to differentially post-process raw GPS data collected with the Magellan Mobile Mapping software. Through post-processing, the positions of every GIS feature you collect in the field can be improved to 1-2 meters accuracy. Thanks to BLADE Magellan unique processing algorithm, post-processing raw data with MobileMapper 6 Office is extremely efficient and straightforward. Through an Internet connection, MobileMapper 6 Office can automatically find and download the base data files that will match the collected raw data. MobileMapper 6 Office also allows project preparation, synchronization with Mobile Mapping software and the management of your GIS maps and data.

Magellan Mobile Mapper 6 Deluxe Starter Kit by Stakemill

We have complied a kit for you to get working right with your Mobile Mapper 6 right out of the box. Includes: Windshiled Mount Downloadable Sample Programs 4 GB SD Card pre loaded with White Papers External Car Antenna with 2 meter cable 12 Volt car power kit Magellan Bag 2 Full Size Stylus Pens 2 break Away Neck Lanyard 5 Screen Gaurds This is a 275 value in parts alone not to mention the sample programs included to allow you to start logging Telephone Poles, Street Lights, Fire Hydrants or anything else you may need to asset track with a few simple programing mods.

DE Laser Rod Bracket for SECO Rods SP

This bracket is designed to be used with Topcon LS-30, LS-50 LS-70 Weighs 0.5 lb (0.23 kg) For use with SECO 7501-20, 7502-21, 7601-20and 7602-21 laser rods.

SI Heavy-Duty GPS Antenna Tripods 6-inch Head Adj Level Lock

Heavy-Duty GPS Antenna Tripods, 6-inch Head, Adj. Level, Lock Pin TRIPOD PN SI-4800 T his heavy duty tripod features a large 6-inch diameter round head with a removable 5/8-11 brass stud that will securely hold robots and lasers This sturdy tripod is suitable for machine control instruments, lasers, robots, prism backsights, scanners, or any other device that requires to be plumbed over a point T he center pole is adjustable up to 2-meters and rotates 360 degrees for calibration and holds a 40-minute vial level with top adjust and compass Large 1.5-inch diameter legs are individually adjustable with high secure and proven knob knocking mechanism Each of the 3 outer legs extends out to 3.2 meters Die cast zinc handles allow for quick adjustment of leg pivots tension without any tools required Each leg i ncludes a replaceable lightweight p oint with stainless steel tip All components are manufactured from a ircraft grade m aterials with all 6061-T6 billet aluminum and stainless steel Tripod legs and poles are electrostatically powder coated. Inner poles and aluminum hardware are anodized clear and black Graduations are our exclusive CNC laser marked that are high precision and will never rub off N ET WEIGHT:

All Metal CNC machined 25mm Prism Canister, M6 Point USA made

All Metal CNC machined 25mm Prism Canister, M6 Point USA made Fits SI-4070 SI-4080 Red

All Metal CNC machined 25mm Prism Canister, USA made

All Metal CNC machined 25mm Prism Canister,USA made Fits SI-4070 Red

Polymer Hybrid 62mm Prism Canister, M20 Thread USA made

All Metal CNC machined 62mm Prism Canister, M20 Thread USA made

All Metal CNC machined 62mm Prism Canister, M20 Thread USA made Black

SI-4070 SI Albatross Series 25mm Stake Out Mini Prism USA made

SI-4070 SI Albatross (tm) Series 25mm STAKE OUT MINI PRISM SYSTEM STAKE OUT TILTING PRISM O ur prisms are precision ground up to 5 arc second accuracy 0mm and 30mm Offset All Metal High Quality construction Prisms are silver coated with a hard epoxy overcoat to protect against moisture and severe climatic conditions 40 Minute vial bubble level side- mounted High Quality Laser engraved Manufactured from air craft grade 6061-T6 Billet Aluminum All Parts are anodized for long lasting durability B right B rass Pointed Ears works a s vertical line target arrows This kit includes SI-40 7 0 Prism Assembly, S tainless Steel Point , 2 -RED 300mm Rods, 2-CLEAR 300 rods , and a Durable Cordura Carrying Case (as shown)

Stakemill Orange Tilting Prism Target Assembly USA made 3055

SI FALCON Series PrismTarget Assembly Premium corrosion proof holder with lever lock Accepts either poly or metal prism (not included) 30 mm 0 mm offsets Made in America

American Made Tilting Target Assembly 2055

Made in the USA - The Original 2050 EAGLE SERIES ALL METALASSEMBLY with INTEGRATED TARGET PLATE ROBUST AND HEAVY DUTY DESIGN FOR RUGGED USE 0 -30 mm OFFSET Accepts either poly or metal prism (not included) All M et al Anti-Slip twist locking system Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. T HE ORIGINAL SI-2050 TILTING PRISM SYSTEM AND STILL THE BEST!! BUILT TOUGH! H EAVY DUTY ALUMINUM ALLOY CONSTRUCTION. FIELD PROVEN ALL AROUND THE WORLD L ASER ENGRAVED SEAL OF AUTHENTICITY NO SLIP ALUMINUM ANODIZED KNOB WITH DEEP KNURLS PRISM CANISTERS AVAILABLE IN ALL METAL OR HYBRID (PATENT PENDING) POLYMER. SEVERAL COLOR OPTIONS AVAILABLE

SI-3045 USA Jayhawk Series Tilting Prism Holder

SI USA Jayhawk SERIES HIGH PRECISION ALL METAL PREMIUMTARGET ASSEMBLY PART : SI-3045 0 -30 mm OFFSET Tilting Axis Height is 100mm Accepts either the poly or metal prism (not included) Holders are All m etal CNC m achined construction S imple, yet proven friction lock Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. 5/8 Adapter fitting , industry standard Available in many colors: Safety Orange, Yellow, Chartreuse, and Black

SI-3040 USA Jayhawk Series 62mm Metal Can. Prism Yellow

SI USA Jayhawk SERIES HIGH PRECISION ALL METAL PREMIUM 62MM PRISM SYSTEM PART : SI-3040 0 -30 mm OFFSET Tilting Axis Height is 100mm Quality prisms are precision ground up to 5 arc second accuracy. Prisms are silver coated with a hard epoxy overcoat to protect against moisture and severe climatic conditions Premium ALL METAL CNC machined canister Holders are All m etal CNC m achined construction S imple, yet proven friction lock Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. 5/8 Adapter fitting , industry standard Available in many colors: Safety Orange, Yellow, Chartreuse, and Black

SI-3040 USA Jayhawk Series 62mm Metal Can. Prism Chartreuse

SI-3040 USA Jayhawk Series 62mm Metal Can. Prism Orange

SI-3040 USA Jayhawk Series 62mm Tilting Prism Yellow

SI USA Jayhawk SERIES HIGH PRECISION ALL METAL PREMIUM 62MM PRISM SYSTEM PART : SI-3040 0 -30 mm OFFSET Tilting Axis Height is 100mm Quality prisms are precision ground up to 5 arc second accuracy. Prisms are silver coated with a hard epoxy overcoat to protect against moisture and severe climatic conditions Standard equiped with SI Exclusive Hybrid Polymer Prism Canister (Metal Canisters are optional) Holders are All m etal CNC m achined construction S imple, yet proven friction lock Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. 5/8 Adapter fitting , industry standard Available in many colors: Safety Orange, Yellow, Chartreuse, and Black

SI-3040 USA Jayhawk Series 62mm Tilting Prism Chartreuse

SI USA Jayhawk SERIES HIGH PRECISION ALL METAL PREMIUM 62MM PRISM SYSTEM PART : SI-3040 0 -30 mm OFFSET Tilting Axis Height is 100mm Quality prisms are precision ground up to 5 arc second accuracy. Prisms are silver coated with a hard epoxy overcoat to protect against moisture and severe climatic conditions Standard equiped with SI Exclusive Hybrid Polymer Prism Canister (Metal Canisters are optional) Holders are All m etal CNC m achined construction S imple, yet proven friction lock Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. 5/8 Adapter fitting , industry standard Available in many colors: Safety Orange, Yellow, Chartreuse, and Black

SI-3040 USA Jayhawk Series 62mm Tilting Prism Orange

SI USA Jayhawk SERIES HIGH PRECISION ALL METAL PREMIUM 62MM PRISM SYSTEM PART : SI-3040 0 -30 mm OFFSET Tilting Axis Height is 100mm Quality prisms are precision ground up to 5 arc second accuracy. Prisms are silver coated with a hard epoxy overcoat to protect against moisture and severe climatic conditions Standard equiped with SI Exclusive Hybrid Polymer Prism Canister (Metal Canisters are optional) Holders are All m etal CNC m achined construction S imple, yet proven friction lock Manufactured from air craft grade anodized aluminum, stainless steel, and brass Fits standard 5/8 prism poles, adapters, etc. Fully compatible with leading manufacturers such as Nikon, Pentax, Trimble, Sokkia and Topcon. Our prism canister (M20 thread) fits most prism holders from other manufacturers. 5/8 Adapter fitting , industry standard Available in many colors: Safety Orange, Yellow, Chartreuse, and Black

Stakemill Yellow Tilting Prism Metal Canister USA made 3050

SI FALCON Series Prism System Yellow Premium corrosion proof holder with lever lock Silver coated 62 mm, +/-2 arc sec., premium quality prism Premium ALL METAL CNC machined canister 30 mm 0 mm offsets Made in America

Stakemill Red Tilting Prism Metal Canister USA made 3050

SI FALCON Series Prism System Red Premium corrosion proof holder with lever lock Silver coated 62 mm, +/-2 arc sec., premium quality prism Premium ALL METAL CNC machined canister 30 mm 0 mm offsets Made in America

Stakemill Orange Tilting Prism Metal Canister USA made 3050

SI FALCON Series Prism System Orange Premium corrosion proof holder with lever lock S ilver coated 62 mm, +/-2 arc sec., premium quality prism I mpact Resistance Polymer Prism Canister - PATENT PENDING 30 mm 0 mm offsets Made in America

Stakemill Chartreuse Tilting Prism Metal Canister USA made 3050

SI FALCON Series Prism System Chartreuse Premium corrosion proof holder with lever lock Silver coated 62 mm, +/-2 arc sec., premium quality prism Premium ALL METAL CNC machined canister 30 mm 0 mm offsets Made in America

South NTS-962 2 Second Reflecrtorless Touch Screen WinCE

Please call us for current promotion, all South Total Stations include a Free Survey Package Free UPS Ground Shipping to the Continental States Large Screen, With Windows Operating System Using Windows CE.NET 4.2 Operating system, easy and convenient to use.3.5inches extremely large LCD display of 240x320dpi, shows a large amount of information at a time, Windows operating system makes the measuring operation easy and clear. Colorful Touch Screen Operating by direct touch, without the help of keyboard. Grapic Display Using grapic. menus to replace the complicated professional operating, convenient for beginners. Absolute Encoding Absolute Encoding. Manual initialization free. If the station is shut off for low power, the original data can be saved when restarted. 32 Bit CPU 32-bit CPU for high speed operation, 64M space is available for programs and data storage. Convenient Data Communication NTS-960 Win total station with two kinds of input and export access, optional. Upload/download data with USB storage USB communication Windows Operating System Interface Main Menu Measurement Parameter Setting Abundant Surveying Programs

South NTS-965 5 Second Reflecrtorless Touch Screen WinCE

Battery for South Reflectorless Total Stations NB-20B

Battery for South Reflectorless Total Stations

HAND-HELD LASER RECEIVERS CR1-I (Interior)

Totally waterproof and dustproof (IP67) LED's indicate grade position Includes lanyard and built-in magnets Reception Range: 250' (75 m) Accuracy: 1/32 (0.75mm) Detection Height 1.5 (38mm) Beeper Volume: High 100db, Low 65db Display Channels: 3 Marking Notch Offset: 25mm Battery Life: Normal 210 hrs, Continuous 70 hrs Warranty: 2 years

LASERMARK ILMXTE Int-Ext Hi-Powered Laser Cross Level

LASERMARK ILMXT Interior-Exterior Hi-Powered Laser Cross Level, Self-Leveling The ILMXT is the ideal laser line layout tool for both interior and exterior applications. Easy-to-use operation features horizontal (level) and vertical (plumb) for both interior and exterior jobs, as well as laser cross and manual mode for interior applications. Outdoor Pulsing Mode feature provides easy range is over 100-ft when used with detector. Features: Outdoor Pulsing Mode allows unit to be used with laser line detector. Extra bright laser diodes for extend range over 100 feet Robust over-molded housing and impact resistance angle window for extended vertical plumb line and durability. Heavy Duty Gimbal magnetically dampened compensator eliminates error by quickly self-leveling the laser Out-of-leveling range sensor triggers the beams to automatically shut off when the unit is moved out of its 5 self-leveling range. 130 fan angle with line length up to 100-ft at 30' Interior Exterior Technical Specifications Laser Diode: (2) Two 635nm AccuracyUp Plumb, Level : 3/32 @ 30' (2.5mm @ 9m) Range: Up to 100' (30m) depending on illumination; with Detector: over 100' (30m) Leveling Type: Gimbal, ball bearing hung compensator magnetically dampened Environment: Water and dust proof, IP54 Power: Three (3) AA batteries (included) Warranty: 2 yr. Use for: decks and patios, outdoor leveling, cabinets and shelving, drop ceilings, wainscoting and paneling, remodeling projects, wall hangings: machinery, pipe and conduit, floor and wall tiles, interior decoration. Laser Mark ILMXT Package s Includes 3- AA Alkaline batteries, hard-shell carrying case, and instruction manual Cat: Line Detector Magnetic Laser Tripod Carrying Case Packages Available Also Includes Standard Package 58-ILMXT Interior-Exterior Package 58-ILMXTE

Carlson Mini 520 MHz w/BT with SurvCE GPS (256 MB)

A field computer that is compact and lightweight, yet tough and resilient. It's RUGGED: Leave it in a hot car or forget it overnight in the depth of winter. Accidentally drop it, get it wet, sit on it go ahead, don't be careful with it. The CarlsonMINI will be there for you and come back for more. The CarlsonMINI is available for delivery now. Features The CarlsonMINI data collector is small, but mighty, and just what surveyors and contractors need in the field: Less than 41/2 by 7 inches; Runs on Windows Mobile 5 ; Lightning-quick processing and wireless connectivity; Fits comfortably in one hand and weighs just slightly more than a pound; Comes complete with Carlson SurvCE 2.0 , the most powerful data collection software on the market today. MIL-STD-810F-rated for water, humidity, sand and dust, vibration, altitude, shock, high temperature, low temperature, and temperature shock. Also, IP-67 Ingress rated. Featuring a touch screen and a high contrast color display; Available in three models: CarlsonMINI 520MHz with Bluetooth, CarlsonMINI 520MHz without Bluetooth, and Carlson MINI 300MHz without Bluetooth. Screen Shots Screen shots will be available soon . Pricing Product Price CarlsonMINI Includes Carlson SurvCE 2.0 Total Station on board. Begins at 1995 (US) Demo Information Request To Demo a unit call 727-538-0886 Download CarlsonMINI product information.

1/2 Inch Rebar Cap 4 Delta Point

DELTA POINTREBAR CAPS FITS 4 OR 1/2 REBAR AND 3/4 PIPE 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text 1/81 rows of 19 character per row, please enter your19 characters below. Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 pieces for minimum order

3/4 Inch Rebar Cap 6 Delta Point

DELTA POINT REBAR CAPS FITS 6 OR 3/4 REBAR 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text Up to 2 rows of 1/8 character per row, please enter yourcharacters below. Inner Row - 16 Spaces Outter Row - 29 Spaces Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 piece for minimum order

5/8 Inch Rebar Cap 5 Delta Point

DELTA POINTREBAR CAPS FITS 5 OR 5/8 REBAR AND 1 PIPE 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text 1/8 Up to 2 rows of13 character per row, please enter your26 characters below. Inner Row - 16 Spaces Ouuter Row - 29 Spaces Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 piece for minimum order

5/8 Inch Rebar Cap 5 Cross Hair

CROSS HAIR REBAR CAPS FITS 5 OR 5/8 REBAR AND 1 PIPE 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text 1/8 Up to 2 rows of13 character per row, please enter your26 characters below. Inner Row - 16 Spaces Ouuter Row - 29 Spaces Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 piece for minimum order

3/4 Inch Rebar Cap 6 Cross Hair

CROSS HAIR REBAR CAPS FITS 6 OR 3/4 REBAR 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text Up to 2 rows of 1/8 character per row, please enter yourcharacters below. Inner Row - 16 Spaces Outter Row - 29 Spaces Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 piece for minimum order

1/2 Inch Rebar Cap 4 Cross Hair

CROSS HAIRREBAR CAPS FITS 4 OR 1/2 REBAR AND 3/4 PIPE 100 PCS Avaialble in PINK , Blue , Yellow , Orange and Red Select your color below Hot stamped in black upper case text 1/81 rows of 19 character per row, please enter your19 characters below. Quick Ship Item - Drop ships only - Seperate freight charges Rebar cap order form Items can be mixed to equal 200 pieces for minimum order

South Survey NL32G (G Style) 32X Auto Level

South Level excellentshockprooffunction Excellentsealedstructureforusinginanyweather Exclusiveclosedmagnetic 12288;field,fully magetically-dampened 12288;compensator Firction-brakedrotation 12288;andendlesshorizontaldrive Prismforviewing 12288;circularvial Model NL20 NL22 NL24 NL26 NL28 NL30 NL32 Standard deviation for 1km double run leveling 2.5mm 2.0mm 2.0mm 1.5mm 1.5mm 1.5mm 1.0mm Image Erect Erect Erect Erect Erect Erect Erect Magnification 20X 22X 24X 26X 28X 30X 32X Objective aperture 34mm 34mm 34mm 38mm 38mm 38mm 38mm Field of view 120' 120' 120' 120' 120' 120' 120' Minimum focus 0.5m 0.5m 0.5m 0.5m 0.5m 0.5m 0.5m Multiplication constant 100 100 100 100 100 100 100 Additive constant 0 0 0 0 0 0 0 Compensator range +/-15' +/-15' +/-15' +/-15' +/-15' +/-15' +/-15' Compensator setting accuracy +/-0.6 +/-0.6 +/-0.6 +/-0.6 +/-0.6 +/-0.6 +/-0.6 Sensitivity of bubble 8'/2mm 8'/2mm 8'/2mm 8'/2mm 8'/2mm 8'/2mm 8'/2mm Horiz.circle-reading 1or 1 gon 1or 1 gon 1or 1 gon 1or 1 gon 1or 1 gon 1or 1 gon 1or 1 gon

SECO Incite Front Locking Prism Assembly Flo Orange Black

CST/berger CST-305R 5 Second Reflectorless Total Station

GET A FREE TOTAL STATION STARTER KIT VALUED AT 1,000 WITH EACH 305R PURCHASED The Robert Bosch Tool Corporation introduces the CST/berger CST-300R Series Electronic Reflectorless Total Station high-end features in a reliable and affordable instrument. The CST-300R models are easy to use and are ideal for modern surveying, construction staking, mapping and GIS, geomarking, environmental studies as well as industrial applications. Available in January of 2009, the new series features Both 2-second and 5-second angle accuracies 3-way data transfer: USB port, RS-232, and SD card. Nearly unlimited storage with built in SD Card The reflectorless CST-300R Series is available in 2 models, 2-second or 5-second angle accuracy. Both units provide precise measurement up to 9,842-ft (3000m) with a single prism and 660-ft (200m) without a prism. The 30x powered instruments have a field of view of 130' with a minimum focus of 1.3m. Data input is convenient too with this reflectorless total station. A dual-sided, four line LCD display is easy to read. The alpha/numeric keyboard is easy to use and program. The CST-300R has the added feature of three onboard language choices for multi-lingual environments. Offering improved productivity, the CST-300R Series features powerful 0n-board software in addition to the freedom of prism-less measurement. Transfering measurements is simple with the versatility of data transfer the CST-300R Series provides. A SD card slot built into the unit is convenient for use in the field and offers nearly unlimited storage of measurements. Data can easily be downloaded from the instrument to a computer through a USB port, RS-232 port or with a separate card reader. With the CST-300R Series you can even transfer data wirelessly in the field through a PDA with a SD card slot. The CST-300R Series Reflectorless Total Stations feature water-resistant housing and are powered by an on-board battery. All the components that accompany the instrument fit into a rugged carrying case. The CST-300R Series comes with a two year warranty. About The Bosch Group The Bosch Group is a leading global supplier of technology and services. In the areas of automotive and industrial technology, consumer goods, and building technology, some 271,000 associates generated sales of over 46.3 billion euros (over 63 billion) in fiscal 2007. The Bosch Group comprises Robert Bosch GmbH and its more than 300 subsidiaries and regional companies in roughly 50 countries. This worldwide development, manufacturing, and sales network is the foundation for further growth. Each year, Bosch spends more than 3 billion euros for research and development, and applies for over 3,000 patents worldwide. The company was set up in Stuttgart in 1886 by Robert Bosch (1861-1942) as Workshop for Precision Mechanics and Electrical Engineering. In North America, the Bosch Group manufactures and markets automotive original equipment and aftermarket products, industrial automation and mobile products, power tools and accessories, security technology, thermo-technology, packaging equipment and household appliances. Bosch employs approximately 25,000 associates in more than 70 locations throughout the U.S., Canada and Mexico, with reported sales of 9.5 billion in fiscal 2007. For more information on the company, visit www.boschusa.com .

CST/berger CST-302R 2 Second Reflectorless Total Station

GET A FREE TOTAL STATION STARTER KIT VALUED AT 1,000 WITH EACH 302R The Robert Bosch Tool Corporation introduces the CST/berger CST-300R Series Electronic Reflectorless Total Station high-end features in a reliable and affordable instrument. The CST-300R models are easy to use and are ideal for modern surveying, construction staking, mapping and GIS, geomarking, environmental studies as well as industrial applications. Available in January of 2009, the new series features Both 2-second and 5-second angle accuracies 3-way data transfer: USB port, RS-232, and SD card. Nearly unlimited storage with built in SD Card The reflectorless CST-300R Series is available in 2 models, 2-second or 5-second angle accuracy. Both units provide precise measurement up to 9,842-ft (3000m) with a single prism and 660-ft (200m) without a prism. The 30x powered instruments have a field of view of 130' with a minimum focus of 1.3m. Data input is convenient too with this reflectorless total station. A dual-sided, four line LCD display is easy to read. The alpha/numeric keyboard is easy to use and program. The CST-300R has the added feature of three onboard language choices for multi-lingual environments. Offering improved productivity, the CST-300R Series features powerful 0n-board software in addition to the freedom of prism-less measurement. Transfering measurements is simple with the versatility of data transfer the CST-300R Series provides. A SD card slot built into the unit is convenient for use in the field and offers nearly unlimited storage of measurements. Data can easily be downloaded from the instrument to a computer through a USB port, RS-232 port or with a separate card reader. With the CST-300R Series you can even transfer data wirelessly in the field through a PDA with a SD card slot. The CST-300R Series Reflectorless Total Stations feature water-resistant housing and are powered by an on-board battery. All the components that accompany the instrument fit into a rugged carrying case. The CST-300R Series comes with a two year warranty. About The Bosch Group The Bosch Group is a leading global supplier of technology and services. In the areas of automotive and industrial technology, consumer goods, and building technology, some 271,000 associates generated sales of over 46.3 billion euros (over 63 billion) in fiscal 2007. The Bosch Group comprises Robert Bosch GmbH and its more than 300 subsidiaries and regional companies in roughly 50 countries. This worldwide development, manufacturing, and sales network is the foundation for further growth. Each year, Bosch spends more than 3 billion euros for research and development, and applies for over 3,000 patents worldwide. The company was set up in Stuttgart in 1886 by Robert Bosch (1861-1942) as Workshop for Precision Mechanics and Electrical Engineering. In North America, the Bosch Group manufactures and markets automotive original equipment and aftermarket products, industrial automation and mobile products, power tools and accessories, security technology, thermo-technology, packaging equipment and household appliances. Bosch employs approximately 25,000 associates in more than 70 locations throughout the U.S., Canada and Mexico, with reported sales of 9.5 billion in fiscal 2007. For more information on the company, visit www.boschusa.com .

Heavy Duty Nylon Bag for Aluminum Grade Rods

Heavy Duty Nylon Bag for Aluminum Rod Heavy-duty Cordura bag with tie end One size fits all STAKEMILL logo silk screened

David White LT8-300P Universal Level-Transit Pkg 44-8871-1

David White LT8-300P Universal Level-Transit Package - includes alum tripod and 8 ft alum grade rod Universal Level-Transit with Optical Plummet 26X Level-Transit 3/16-in.(4.75mm) at 150-ft.(45m) leveling accuracy Up to 400-ft.(120m) range Horizontal circle, lock and tangent Vertical arc, lock and tangent 1:100 stadia with glass reticle Optical Plummet We reccomend a heavy duty 5/8 x 11 thread tripod Ships from manufacturer

Police Professional Measuring Wheel MP201 Tape K Line Wood Ruler

POLICE VEHICLE MEASURING PACKAGE Keson Metal Professional Measuring Wheel MP201 Simplicity and durability were two principles that guided our design of the Metal Professional Wheel. The result is a wheel that rolls easily over the most difficult terrain and can stand up to constant heavy use. Solid Wheel, no spokes to catch in grass or sticks. Strong, Rigid 1-Piece Handle, strongest frame in the field. Safety Reflector on handle makes users more visible Time-tested proven counters with huge numbers. Superior counter protection and placement5-digit counter. Up to 99,999 feet. Extra-wide wheel rolls easily over soft surfaces like sand and gravel. Molded counter trip fines, will not break, bend or snag on grass. 6-Year Manufacturers Warranty Included Graduations in feet Keson 6 1/2 Foot Folding Wood Rulers WR1018 Great for one handed measurements or high wind applications where a power tape would buckle. Folds down to just 9-1/2 inches. Ft Inches - Ft 10ths K Line, 100 Ft Nylon Reinforced Steel Blade KLN K Line, Nylon Reinforced Steel Blade KLN Double-sided blade! Economically priced. Great for laying out fence posts, estimating, landscaping, etc. Tough, A.B.S. open reel case, a shovel-style grip and a large crank handle to wind the tape with ease. THIS IS JUST ONE OF THE MANY PACKAGES WE HAVE AVAILABLE, SIMPLY EMAIL THE ITEMS YOU NEED ASSEMBLED FOR A PACKAGE PRICE - CARRY BAGS ARE AVAILABLE

Police Professional Measuring Wheel MP201 Tape K Line Pocket Rod

POLICE VEHICLE MEASURING PACKAGE Keson Metal Professional Measuring Wheel MP201 Simplicity and durability were two principles that guided our design of the Metal Professional Wheel. The result is a wheel that rolls easily over the most difficult terrain and can stand up to constant heavy use. Solid Wheel, no spokes to catch in grass or sticks. Strong, Rigid 1-Piece Handle, strongest frame in the field. Safety Reflector on handle makes users more visible Time-tested proven counters with huge numbers. Superior counter protection and placement5-digit counter. Up to 99,999 feet. Extra-wide wheel rolls easily over soft surfaces like sand and gravel. Molded counter trip fines, will not break, bend or snag on grass. 6-Year Manufacturers Warranty Included Graduations in feet 6 Ft Pocket Rod The Pocket Rod is ideal for foundation work, grading, swimming pools, and construction. The 6 foot nylon-coated blade protects the graduations from moisture and wear. Easy-to-read numbers are printed on both sides. The blade also features a built-in target for sighting and a heavy-duty end hook. When youre finished, the blade stores in its own sturdy case. Used to set height of instrument Perfect for photographs that require a scale. A police and insurance adjusters favorite! 10ths only K Line, 100 Ft Nylon Reinforced Steel Blade KLN K Line, Nylon Reinforced Steel Blade KLN Double-sided blade! Economically priced. Great for laying out fence posts, estimating, landscaping, etc. Tough, A.B.S. open reel case, a shovel-style grip and a large crank handle to wind the tape with ease. THIS IS JUST ONE OF THE MANY PACKAGES WE HAVE AVAILABLE, SIMPLY EMAIL THE ITEMS YOU NEED ASSEMBLED FOR A PACKAGE PRICE - CARRY BAGS ARE AVAILABLE

TDS Ranger Multi Port Adapter and USB Cable Ranger Only

Combo 67301-08 / 67101-00 Ranger 130 / 200 USB download 26 pin mutli-port adapter for charging USB and ethernet connections includes USB cable Formerly TDS RGR-A-DOWNLOADBDL

Brass Monument Markers 2-1/4 Inch 9870

Available with plain unstamped top or with special stamp to your specifiaction Select from 2-1/4 diameter or 3-1/2 diameter. Steel stamp charge oninitial order only - Fax sketch of desired lettering. We reccomend custom stamping discs have their deisgn uploaded using the selection below

Gammon Reel Refill 24yds Bobbin 6001-XX

Braided linen cord comes in 24 yard spools Sokkia Item 812413, 812423, 812451, 812452, 812454, 812650

Brass Plumb Bob Replacement Cap 812293 6000-001

The plumb bob cap is a replacement part that fits any of the SECO plumb bobs, 6000-012 through 6000-032. Steel ASA Sokkia Item 812293

Leather Sheath for 18 - 32 oz (510 - 907 g) Plumb Bob 812335

The heavy-duty leather sheath is double stitched top grain leather with a belt loop. It's designed for18 - 32 oz (510 - 907 g) plumb bobs. Sokkia Item 812335

Leather Sheath for 14 - 16 oz (397 - 454 g) Plumb Bob 812325

The heavy-duty leather sheath is double stitched top grain leather with a belt loop. It's designed for14 - 16 oz (397 - 454 g) plumb bobs. Sokkia Item 812325

Leather Sheath for 10 - 12 oz (283 - 340 g) Plumb Bob 812315

The heavy-duty leather sheath is double stitched top grain leather with a belt loop. It's designed for 10-to-12 oz (283-to-340 g) plumb bobs. Sokkia Item 812315

Leather Plumb Bobs Scabbards Sheath fits 18 to 24 oz

Embossed witht he Stakemill logo. Heavily stitched and riveted for long life, these sheaths are made of top grain saddle leather. A strong metal snap secures the bob in the sheath, cut outs for thick work belts. A STAKEMILL exclusive. Large fits 18-24oz Useful for those who carry multiple tools Sokkia Item 812315, 812325, 812335

SECO Quick Lever 1 Inch Bipod Thumb Release Legs 5217-51

This open clamp head features the SECO Quick Lever design that makes attaching or detaching the ONE INCH pole lightning fast. The lever cam action is mechanically simple and holds fast. The locking mechanism is made of non-marring Delrin with an EPDM 80-durometer rubber plug for positive grip. It works withone-inch (25 mm)diameter poles. (For poles with 1.25-in (32-mm) diameters order 5217-50-XXX.) This new Quick Lever bipod features SECO's Thumb Release legs. The bipod can also be purchased with Quick Release legs (5211-5X-XXX). Weighs approximately 4.2 lb (1.90 kg)

SECO Quick Lever 1 Inch Bipod with Quick Release Legs 5211-51

This new open clamp head features a Quick Lever that makes attaching or detaching the ONE INCH pole lightning fast. The lever cam action is mechanically simple and holds fast. The locking mechanism is made of non-marring Delrin with an EPDM 80-durometer rubber plug for positive grip. It works with one-inch (25-mm) diameter poles. For 1-1/4 in (32 mm) diameter, order 5211-50-XXX. This new Quick Lever bipod features SECO's Thumb Release legs. The bipod can also be purchased withThumb Release legs (5217-5X-XXX). Weighs approximately 4.2 lb (1.90 kg)

Sokkia LDT520 5 600m Laser Digital Theodolite free Starter Kit

Package includes a freeStakemill Tripod, Pole Bi-Pod, Prism Poe and Prism valued at 1,000 Sokkia releases the LDT520, a new 5 digital theodolite equipped with a telescope with laser beam emission capability. Representing a significant evolution over the previous model LDT50, the LDT520 boasts the worlds longest laser range, class-topping dust and water protection,and a continuous operation time over 2.5 times that of its predecessor. Major improvements over the previous model 1. Worlds longest laser range The LDT520 offers a 600-meter (2,000 ft.)* beam range from an easy-to-handleClass 3R laser. 2. Dust and water protection at the top of its class The LDT520 achieves an IP66 rating, the highest level of dust and water protection in a theodolite. The LDT520 is rated the highest level 6 for dust protection in the IP code specified by the IEC. The unit is shielded from fine powder-type dust. The units water protection is also rated at level 6, the highest level for a theodolite, enabling it to be used with confidence under moist underground conditions. 3. Absolute encoders Newly equipped with the market-proven advanced absolute encoders for higher reliability and lower power consumption. Provides 5 angle accuracy with resolutions of 1/5, 0.0002/0.001 gon or 0.005/0.02 mil. 4. Longer battery life The LDT520 achieves a continuous operation time over 2.5 times that of the previous model, using a standard detachable battery. Continuous use for 12.5 hours at the maximum output of 4.5 mW and 13.5 hours at 1 mW. Supplied with two batteries. 5. Operable in tighter spaces The minimum focus of the optical plummet has been reduced from 20cm in the previous model to 15cm. Can be precisely set at 15cm (5.9 in.) directly above the reference point. * Worlds longest range for a laser theodolite (as of October 1, 2008). Unique feature of the SOKKIA laser digital theodolite Emits both focused and parallel beams When the focused beam is used, the diameter of the beam spot is smallest at the point of focus of the telescope. When the parallel beam is used, the beam diameter remains constant at any distance, making the unit ideal for directional control in tunnel excavations. The parallel beam can be focused by simply adjusting the telescope focusing ring to the ? mark. No external accessories are required. Major applications Directional control in tunnel excavations using NATM or Shield Machines (using a parallel beam) Precise alignment and positioning in construction projects (using a focused beam) Download Brochure

Sokkia LSE1 Laser Sighting Eyepiece 731153

SOKKIA LSE1 Laser Sighting Eyepiece 731153 View all Sokkia Len, Filters and Eye Piece Options

Sokkia ACE5 Auto collimation Eyepiece DT 731133

SOKKIA ACE5 Auto collimation Eyepiece DT 731133 View all Sokkia Len, Filters and Eye Piece Options

Sokkia OF3A Solar filter flip type 732951

SOKKIA OF3A Solar filter flip type 732951 View all Sokkia Len, Filters and Eye Piece Options

Sokkia EL6 30x Eyepiece DT600 732932

SOKKIA EL6 30x Eyepiece DT600 732932 View all Sokkia Len, Filters and Eye Piece Options

Sokkia EDC109 Power Cable for LAP1 and ACE5 731162

EDC109 Power Cable for LAP1 and ACE5 similar to cable in photograph

Sokkia Precision LAP1-11 Tribrach with Laser Plummet 731161

Sokkia Precision LAP1-11 Tribrach with Laser Plummet 731161 LAP1-11 (Laser Plummet) with BDC55 and EDC109

Sokkia DE25 Diagonal Eyepiece 731123

SOKKIA DE25 Diagonal Eyepiece 731123 View all Sokkia Len, Filters and Eye Piece Options

Sokkia EDC3A Cable for BDC57 to SET 2.0m 685559

Sokkia EDC3A Cable for BDC57 to SET 2.0m 685559 Just like their industry-leading cables,Sokkia data collector cables are designed to exceed the harsh environmental requirements of industrial applications. Market research has shown that the chronic failure mode in data collector cables is the cable joint at the sensor connector end. Our DataFlex cables are reinforced to solve this problem and have displayed significant improvement over competitive cables. Additional DataFlex features include: perform at temperatures up to 120C tested to withstand a pull strength of over 100 pounds reinforcedcable USB version 60 Day Warranty similar to cable in photograph

Sokkia EDC7A Cable for BDC57 to SET 0.5m 685558

Sokkia EDC7A Cable for BDC57 to SET 0.5m 685558 similar to cable in photograph

Sokkia SCT6 655516 Total Station Bluetooth Kit 655516-K

This package include the Bluetooth Kit: 655516 - Sokkia SCT 6 738046 - BDC46A Lithium Ion Battery (second battery) 635039 - DOC27-USB Cable from SET/NET/SDL to USB port 726862 - P2A Peanut Prism Kit The Sokkia SCT6 was designed for the North American construction worker. This six-second angular accuracy Total Station capable of measuring to prisms and reflective sheets will only be offered in North America. Every aspect of the Sokkia SCT6 is designed with the job in mind, helping you finish it faster, easier and safer. This instrument is designed to be more user-friendly and easier to work with. The SCT6 has simplified menus and commands, written in terms even the occasional user can understand. Based on the proven Series 10 design, the SCT6 carries an industry-leading IP66 dust-proof and water-proof rating, and has a wide temperature working range. It also incorporates Bluetooth wireless technology, eliminating the need to connect a cable to a wireless-enabled datalogger or desktop PC. Download Brochure

ProMark 2600 Series Advanced Auto Level 20X Kit

ProMark 2600 Series Rugged, all-metal housing. Rack and gear system for increased accuracy. Reliable X-wire hung, air dampened compensator. Sealed construction for use in various weather conditions. Includes carrying case, adjusting pin, allen wrench, plumb bob and instruction manual Specifications PM2620 PM2624 PM2628 Magnification: Standard deviation for 1 km (0.6 mile): Objective diameter: Field of view: Shortest focus distance: Compensator type: Leveling accuracy: Circular vial: Horizontal circle: Minimum division: Weight: 20x 2.5 30mm 120' 0.6m 15' 0.8' 24x 2.0 30mm 120' 0.6m 15' 0.8' 8'/2mm 360 or 400gons 1 or 1gon 1.8kg 28x 1 .5 36mm 120' 0.6m 15' 0.8' Includes Level, Alum tripod and Alum 9 Ft Rod

Pacific Laser Systems Rotary Laser Level Kit, PLS HVR 500

Package Includes: Laser, Tripod 9 Ft Rod Features Applications: The PLS HVR 500 is a compact, mid range rotary laser designed for light commercial, residential, and remodeling projects. Horizontal and vertical applications; the PLS HVR 500 is versatile for short and mid range layout with an accuracy of 1/8 inch at 100 feet. Dual Slope Axis. Features: The PLS HVR 500 System Includes: PLS HVR 500 Carrying Case PLS RC 500 Remote Control Ceiling Bracket PLS HVD 500 Detector Operating Manual Spec Summary: Working Range: 500' Self Leveling Range: 5 degrees Accuracy: 1/8 @ 100' Power Supply: Nicad Dimensions: 5 x 4 3/4 x 6 Class II Laser Product

OMNI European Tribrach

Circular leveling sensitivity is 10/2mm. NO Optical Universal 5/8 x 11 base plate Tribrach is compatible with most precision tribrach adapters Colors availableareyellow,and green Omni Optical Products, Inc. (Omni), has supplied innovative, precision, and cost effective instruments and accessories to the Survey, GPS, and Construction Markets for over 20 years. We provide custom fabrication, engineering, and product design to meet our customers ever changing proprietary requirements. Recent changes have enabled Omni to provide better costing for our products and services while maintaining timely delivery. Product quality will never be compromised.

OMNI Tribrach

Circular leveling sensitivity is 10/2mm. Universal 5/8 x 11 base plate Colors available is grey, yellow, black, and green Tribrach is compatible with most precision tribrach adapters Omni Optical Products, Inc. (Omni), has supplied innovative, precision, and cost effective instruments and accessories to the Survey, GPS, and Construction Markets for over 20 years. We provide custom fabrication, engineering, and product design to meet our customers ever changing proprietary requirements. Recent changes have enabled Omni to provide better costing for our products and services while maintaining timely delivery. Product quality will never be compromised.

OMNI Advanced Series 9300 Strobe Prism Assembly Aqua Blue

Advanced Series 9300 Flashing Strobe Prism Assembly Our coated prisms are manufactured to very high-quality optical standards. All reflective surfaces are provided with a resistant coating to avoid loss of reflectivity which protects these surfaces from adverse conditions such as dirt or condensation. All metal holder and quick release locking mechanism. Three target sizes available. Stainless steel hardware No adjusting screws. Hermetically sealed 62mm (2.5) Precise Prism. Fully compatible with instruments from Sokkia, Topcon, Pentax, Nikon, etc. Standard available colors are orange/white, yellow/black, hi-vis chartreuse/black. Special colors available upon request. Silver or copper coating available. Technical Drawing Omni 9300-C-O Single Tilting Assembly Compact Target (orange) Omni 9300-FS-C-C Single Tilting Assembly Compact Target (hi-vis chartreuse) Omni 9300-C-Y Single Tilting Assembly Compact Target (yellow). Omni 9300-C-O Single Tilting Assembly Compact Target (orange). Omni 9300-FS-C-AB Single Tilting Assembly Compact Target (aqua blue - Nikon).

OMNI Advanced Series 9300 Strobe Prism Assembly Chartreuse

Advanced Series 9300 Flashing Strobe Prism Assembly Our coated prisms are manufactured to very high-quality optical standards. All reflective surfaces are provided with a resistant coating to avoid loss of reflectivity which protects these surfaces from adverse conditions such as dirt or condensation. All metal holder and quick release locking mechanism. Three target sizes available. Stainless steel hardware No adjusting screws. Hermetically sealed 62mm (2.5) Precise Prism. Fully compatible with instruments from Sokkia, Topcon, Pentax, Nikon, etc. Standard available colors are orange/white, yellow/black, hi-vis chartreuse/black. Special colors available upon request. Silver or copper coating available. Technical Drawing Omni 9300-C-O Single Tilting Assembly Compact Target (orange) Omni 9300-FS-C-C Single Tilting Assembly Compact Target (hi-vis chartreuse) Omni 9300-C-Y Single Tilting Assembly Compact Target (yellow). Omni 9300-C-O Single Tilting Assembly Compact Target (orange). Omni 9300-C-AB Single Tilting Assembly Compact Target (aqua blue - Nikon).

OMNI Advanced Series 9300 Strobe Prism Assembly Yellow

Advanced Series 9300 Flashing Strobe Prism Assembly Our coated prisms are manufactured to very high-quality optical standards. All reflective surfaces are provided with a resistant coating to avoid loss of reflectivity which protects these surfaces from adverse conditions such as dirt or condensation. All metal holder and quick release locking mechanism. Three target sizes available. Stainless steel hardware No adjusting screws. Hermetically sealed 62mm (2.5) Precise Prism. Fully compatible with instruments from Sokkia, Topcon, Pentax, Nikon, etc. Standard available colors are orange/white, yellow/black, hi-vis chartreuse/black. Special colors available upon request. Silver or copper coating available. Technical Drawing Omni 9300-C-O Single Tilting Assembly Compact Target (orange) Omni 9300-C-C Single Tilting Assembly Compact Target (hi-vis chartreuse) Omni 9300-FS-C-Y Single Tilting Assembly Compact Target (yellow). Omni 9300-C-O Single Tilting Assembly Compact Target (orange). Omni 9300-C-AB Single Tilting Assembly Compact Target (aqua blue - Nikon).

OMNI Advanced Series 9300 Strobe Prism Assembly Orange

Advanced Series 9300 Flashing Strobe Prism Assembly Our coated prisms are manufactured to very high-quality optical standards. All reflective surfaces are provided with a resistant coating to avoid loss of reflectivity which protects these surfaces from adverse conditions such as dirt or condensation. All metal holder and quick release locking mechanism. Three target sizes available. Stainless steel hardware No adjusting screws. Hermetically sealed 62mm (2.5) Precise Prism. Fully compatible with instruments from Sokkia, Topcon, Pentax, Nikon, etc. Standard available colors are orange/white, yellow/black, hi-vis chartreuse/black. Special colors available upon request. Silver or copper coating available. Omni 9300-FS-C-O Single Tilting Assembly Compact Target (orange) Omni 9300-C-C Single Tilting Assembly Compact Target (hi-vis chartreuse) Omni 9300-C-Y Single Tilting Assembly Compact Target (yellow). Omni 9300-C-O Single Tilting Assembly Compact Target (orange). Omni 9300-C-AB Single Tilting Assembly Compact Target (aqua blue - Nikon).

DuraWheel DW-500 Measuring Wheel m/dm 68922 w bag 68932

Item 68922 Meters - decimeters with Bag 68932

DuraWheel DW-500 Measuring Wheel 10ths 68920 w Bag 68932

Item 68920 Feet 10ths with bag 68932

DuraWheel DW-1000 Measuring Wheel m/dm 68912 w/Bag 68930

Item 68912 meters - decimeters and Bag 68930

DuraWheel DW-1000 Measuring Wheel Ft 10ths 68910 w/Bag 68932

Item 68910 Feet 10ths and Bag 68930

SECO Tripod Hook Bracket for Archer Data Controllers 5196-16

Tripod Hook Bracket for Archer Data Controllers . The bracket is constructed ofanodized aluminum. It comes with an installation tool and an instruction sheet.

SECO Tripod Hook Bracket for TDS Nomad 5196-17

The Tripod Hook Bracket keeps your TDS Nomad on the instrument tripod. The bracket is constructed ofanodized aluminum. It comes with an installation tool and an instruction sheet.

SECO Titanium Prism Pole Point Removable Tip 5194-06

Need a new prism pole point? Try Titanium! This point features an anodized aluminum body and an easy-to-replaceTitanium point. Weighs 0.16 lb (0.07 kg)

2-Meter Carbon Fiber Snap-Lock Rover Rod QR Tip GT 5128-21-GT

Unit features a Quick Release Tip 'GT' model has graduated (10ths/100ths) outer pole. The Carbon Fiber Snap Lock Rover Rod features a new one-piece design. It's faster and more user friendly (compared to traditional two-piece, screw-together rods). It's an ideal rod for all GPS RTK surveys. The rod telescopes and locks at 2 meters and collapses to 1.354 meters. Two locking systems are featured on the rod: the snap lock which guarantees no slipping and the compression lock centers the telescoping inner and maintains straightness. It includes a 40-minute adjustable circular vial. Carbon fiber is strong, dent resistant and has a 'zero' coefficient of expansion. Weighs 1.60 lb (0.73 kg)

2-Meter Carbon Fiber Snap-Lock Rover Rod QR Tip 5128-21

Unit features a Quick Release Tip The Carbon Fiber Snap Lock Rover Rod features a new one-piece design. It's faster and more user friendly (compared to traditional two-piece, screw-together rods). It's an ideal rod for all GPS RTK surveys. The rod telescopes and locks at 2 meters and collapses to 1.354 meters. Two locking systems are featured on the rod: the snap lock which guarantees no slipping and the compression lock centers the telescoping inner and maintains straightness. It includes a 40-minute adjustable circular vial. Carbon fiber is strong, dent resistant and has a 'zero' coefficient of expansion. A 'GT' model is also available with a graduated (10ths/100ths) outer pole, see your dealer for details. Weighs 1.60 lb (0.73 kg)

2-Meter Carbon Fiber Rover Rod One Piece External Grads

Featues Extrenal Graduations 5128-00-GT Here's a featherweight carbon fiber composite that is ideal for GPS. The rod is a fixed height at two meters. The pole comes with an on-board 40-minute adjustable vial. It has a male 5/8 x 11 tip. Weighs 1.42 lb (0.64 kg)

SECO Geodimeter Style Telescoping Prism Pole with Site Rod

Small in diameter, 20 mm, this light weight prism pole is designed to work with the Geodimeter style sliding prism. It is an excellent pole/prism configuration for all survey applications. The prism can be mounted on the site rod or the graduated outer section. The telescoping section is graduated in feet and centimeters and collapses to 4.80 ft (1.46 m) and expands to 8.60 ft (2.62 m). The graduations in feet, tenths and hundredths are on the outer section for direct reading of prism height. The site rod can be used as a short hand held rod with two height marks, 0.50 ft (15.24 cm) and 1.00 ft (30.48 cm). It comes with the QLV locking mechanism with a 40-min circular, adjustable vial. This pole also comes with two diameter adapters for bipods and data collector attachment. This pole has a hardened steel removable point. It is painted bright fluorescent orange. Weighs 2.75 lb (1.24 kg) Shown with option bi-pod

SECO Heavy-Duty, Adjusters, GPS / Machine Control Tripod

HAS ADJUSTERS This new tripod is the heavy-duty version of SECOs original 2-meter, GPS tripod (5115-00-XXX). The fixed-height center pole measures 2 meters and rotates 360 for calibration checking. It comes with an 8-minute circular vial. A compass is included as part of the handle set. The large telescoping legs have a 1.25-to-1.50-inch-diameter and extend to 3.2 meters (10.5 feet); its large round head measures 6-inches in diameter and features a removable brass 5/8 x 11 stud. This tripod is suitable for machine control instruments, scanners, lasers, robots, prism backsights; anything that needs to be plumbed over a point. Weighs 24.2 lb (11 kg)

SECO 4700 Illuminated Target Series Survey Prism Orange

4700 Illuminated Target Series See video at bottom of listing Utilizing the same cutting edge backlight technology in todays notebook computers, Secos 4700 Series Illuminated Target is designed to be visible in the most adverse conditions including dark environments. Engineered for years of trouble free use. Powered by long-life lithium batteries. Use as a standard target during the day, then switch on the light for use in dark environments. Includes Seco 6416 Strobe Prism Includes protective hard case for safe transport. Available in Orange Possible uses include: Traffic Accident and Crime Scene Investigation Mining Tunnel Monitoring Applications Adverse Weather Conditions Dense Forest or Foliage Work Day or Night

Horizon Laser System with Storm Detector LL500 4850-00

The Horizon emits a continuous self-leveled laser beam that is rotated to create a plane of laser light that extends over a work area up to 1,600 foot (500 m) diameter. It has accuracy of 1/16 in at 100 ft ( 1.5 mm at 30 m / 10 arc seconds). The Horizon has a built-in out-of-level-warning and shut-off to eliminate rework caused by communication errors or out-of-level instruments. Four standard D-cell alkaline batteries provide long 80 hours of continuous use. This unit has a rugged, ironclad design and comes with a two-year laser warranty. The Horizon comes with the Storm Laserometer, rod clamp, batteries, and a hard shell case. Weighs (with batteries) 7.5 lb (3.4 kg) Aluminum tripod and fiberglass rod sold separately. Download Brochure Specifications Laser Type, Classification 670 nm visible, Class II Self-Leveling Range 10 arc minutes Compensation Type Wire Hung, Air Damped Rough Leveling Method Three-screw leveling base with bulls-eye Horizontal Accuracy 10 arc seconds over temperature Machine Control Compatible Yes Power Source 4 D-cell alkaline batteries Battery Life (68 F / 20 C) 80 hours Operating Diameter 1600 ft (500 m) Operating Temperature -4F to 122F (-20C to 50C) Weight (with batteries) 7.5 lbs (3.4 kg) Tripod Mount 5/8 in x 11 SECO 4850-00

OMNI 15 Ft Prism Pole PosiLoc II Precise Tip 9939

OMNI PosiLocII prism poles offer fast setup and positive clamping without pinched fingers! Forget about inaccurate readings due to a slipping pole the PosiLoc II Quick Release will get the job done with its fast setup and positive clamping. Omni PosiLoc II poles featuresturdy and dent resistant aluminum construction. Top section of the prism pole has a laser engraved graduation scale, which are guaranteed not to rub off for the life of the pole; the bottom section is powder painted fop durability. The pole is designed to be easily cleaned and serviced. Adjust clamping tension yourself to suit your needs. The PosiLoc II wide clamping surface will not scratch pole graduations and assures a tight clamp. The prism pole includes a circular level vial and replaceable hardened steel point. The pole extends from 4.6 feet to 8.5 feet and graduated in both 10th and metric.

OMNI 12 Ft Prism Pole PosiLoc II Precise Tip 9936

OMNI 8 Ft Prism Pole PosiLoc II Precise Tip 9975

OMNI Tilting Prism 0/-30 Offset 1210

OMNI Tilting Prism 0/-30 Offset 1210 0/-30mm offset Precision ground glass up to 2 arc seconds Fully compatible with leading manufacturers such as Sokkia, Trimble, Topcon, Pentax, Nikon, etc Fits Stakemill poles also Hermetically sealed 2-1/2 (62.5mm) Precise prism Prism can mounting thread: M20 x 2 Single tilt holder tilts to 360 Bayonet adapter and 5/8 x 11 female mounting thread on holder Prism canister and holder/target molded from durable lightweight polycarbonate

OMNI 15 Ft Prism Pole TwissLoc Precise Tip 9839

15ft Prism pole with TwissLoc Soft Rubber allows you to place the rigth amount of tension for a secure and fast lock. 40 minute bubble vial is built into the grip body which frees up sapce on the pole.

OMNI 12 Ft Prism Pole TwissLoc Precise Tip 9836

12ft Prism pole with TwissLoc Soft Rubber allows you to place the rigth amount of tension for a secure and fast lock. 40 minute bubble vial is built into the grip body which frees up sapce on the pole.

OMNI 8 Ft Prism Pole TwissLoc Precise Tip 9875

8 ft Prism pole with TwissLoc Soft Rubber allows you to place the rigth amount of tension for a secure and fast lock. 40 minute bubble vial is built into the grip body which frees up sapce on the pole.

OMNI Mini Prism Pole 18 Inches TwissLoc 9825

Mini prism pole with TwissLoc Extends from 18 inches to 36 inches Soft Rubber allows you to place the rigth amount of tension for a secure and fast lock. 40 minute bubble vial is built into the grip body which frees up sapce on the pole. shown below with optional prism and mini bipod - not included

OMNI Thumb Release Prism Pole Tripod 8950

TheOMNI Thumb Release Open Clamp Trpod allows the user to simply clamp the pole into place without lifting and threading it through the Tripod head! Within seconds the operator can set up a free standing GPS antenna pole or prism pole. Adjustable for poles from 7/8 to 1-1/2. Legs extend to72 inchesfor use in uneven terrain. Collapses to 42 inches. Weighs 4 lb

OMNI Fast Clamp Prism Pole Bipod 9840

TheOMNIFast ClampOpen Clamp Bipod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Within seconds the operator can set up a free standing GPS antenna pole or prism pole. Adjustable for poles from 7/8 to 1-1/2. Legs extend to72 inchesfor use in uneven terrain. Collapses to 42 inches. Weighs 4 lb

OMNI TwissLoc Prism Pole Bipod 9845

TheOMNI TwissLoc Open Clamp Bipod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Within seconds the operator can set up a free standing GPS antenna pole or prism pole. Adjustable for poles from 7/8 to 1-1/2. Legs extend to72 inchesfor use in uneven terrain. Collapses to 42 inches. Weighs 4 lb

OMNI Mini Thumb Release Prism Pole Bipod 8943

TheOMNI MINI Thumb Release Open Clamp Bipod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Within seconds the operator can set up a free standing GPS antenna pole or prism pole. Adjustable for poles from 7/8 to 1-1/2. Shown with optional mini prism pole 9825 - not included

OMNI Thumb Release Prism Pole Bipod 8940

TheOMNI Thumb Release Open Clamp Bipod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Within seconds the operator can set up a free standing GPS antenna pole or prism pole. Adjustable for poles from 7/8 to 1-1/2. Legs extend to72 inchesfor use in uneven terrain. Collapses to 42 inches. Weighs 4 lb

OMNI Tribrach with Laser Plummet

Fast accurate plumbing at the touch of a button

OMNI Tribrach Adapter Plummet 2255

OMNI Tribrach Adapter WITH OUT Optical Plummet 2255

OMNI Tribrach Adapter W/Optical Plummet 2250

OMNI Hand Level 1x 2335

Hand Level 1x

OMNI Magnifiying Hand Level 5x 2325

Magnifiying Hand Level 5x

OMNI Compact Hande Level 2375

Compact Hand Level

OMNI GPS Graphite Prism Pole Tripod

Constructed of Graphite material. The Omni Thumb Release Open Clamp Tripod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Our tripods feature large, smooth, thumb release buttons. The thumb lock design allows adjustment of tension without disassembly of the leg. Immediately the user can set up a free standing range pole or prism pole. The universal head will accommodate poles from 1-to-1.5-inch (25- mm-to-38-mm) diameter.

OMNI GPS Antenna Tripod Carrying Case 3085

OMNI GPS Antenna Tripod Carrying Case 3085 GPS Antenna Tripod Carrying Case. Features include rugged Nylon Cordura with large pocket and shoulder strap.

OMNI 25cm Graphite GPS Range Pole 3063

Graphite GPS Range Pole section

OMNI 25cm GPS Range Pole 3003

GPS Range Pole section

OMNI 50cm Graphite GPS Range Pole 3062

Graphite GPS Range Pole section

OMNI 1 Meter Graphite GPS Range Pole 3061

Graphite GPS Range Pole section

OMNI 50cm GPS Range Pole 3002

GPS Range Pole section

OMNI 1 Meter GPS Range Pole 3001

GPS Range Pole section

OMNI GPS Lightweight 2 Meter Receiver Pole 3060

GPS Lightweight 2 Meter Receiver Pole Rugged Two-Meter PosiLoc Quick-Release GPS Receiver Pole is standard with 1-1/4 dia.

OMNI GPS 2 Meter Receiver Pole 3010

GPS 2 Meter Receiver Pole Rugged Two-Meter PosiLoc Quick-Release GPS Receiver Pole is standard with 1-1/4 dia.

OMNI 2 Meter Fixed Aluminum GPS Rover Rod 3022

OMNI 3022 Aluminum Rover Rod 2 meter fixed G.P.S. Antenna pole. Includes a 45 minute vial and hand grip; replaceable point and male 5/8 x 11 tip. Carries additional UPS due to one piece design

OMNI Graphite Rover Rod Screw Together 3020

OMNI 3020 Graphite Rover Rod Lightweight 2 meter (1 meter sections with 5/8 x11 male/female threads). Includes a 45 minute adjustable vial and replaceable steel and aluminum point. 5/8 x 11 tip is standard; optional Leica Style tip available.

OMNI GPS Antenna Pole Bipod (Omni 3340)

The Omni Thumb Release Open Clamp Bipod allows the user to simply clamp the pole into place without lifting and threading it through the bipod head! Our bipods feature large, smooth, thumb release buttons. The thumb lock design allows adjustment of tension without disassembly of the leg. Immediately the user can set up a free standing GPS antenna pole or prism pole. The universal head will accommodate poles from 1-to-1.5-inch (25- mm-to-38-mm) diameter. Standard color is orange, other colors available. Graphite material is also available.

OMNI Single Mag Mount Leica Adapter 3076

New mounting design for fast and easy use. Use to attach GPS antennas to top of vehicles. Single Mag Mount with quick release adapter (Leica Style).

OMNI Quick Release Triple GPS Magnetic Mount for Vehicle 3070

New mounting design for fast and easy use. Use to attach GPS antennas to top of vehicles. Includes quick release adapter.

OMNI Gas Spring Stabilized GPS Tripod 3065

Setup has never been easier. Simply set tripod height and lock with the pin. Unlatch legs and watch them open fully automatically! No more fumbling around trying to hold the legs while locking leg height. The precise, smooth action, is similar to that of a hatchback on a car or SUV. The gas spring stabilizers make this tripod unsurpassed in ease of setup and stability. Ask yoursales representative for a demonstration today!

SECO 1 In Pole Rod Extension 2 Foot 5131-01

Range Pole Extension24 Inch This sturdy aluminum pole has 5/8 x 11 male threads on the bottom and 5/8 x 11 female threads on the top to allow additional sections to be added for height. The pole is electro statically powder-painted for maximum durability. 1-inch (25 mm) outside diameter. Weighs 1.1 lb (0.50 kg)

Leica Circular Prism with Holder GPR121

Try the lower priced Omni 34037 The GPR range of prisms are supplied with a holder and target plate. The GPR121 Professional version is manufactured from quality metal components, for accuracy and long life.

Leica GST120-9 Wood Tripod

Click here to buy a better priced tripod Tripods are well regarded by the market for being extremely stable and long lasting. Leica GST20-9 Sturdy Wooden Tripod, extension leg, 6 feet long. The Leica GST20-9 fits all Leica Geosystems levels, theodolites, total stations and GPS antenna. Pouch Not Included 5/8x11 Thread Size For all climates Bright Safety Color Robust, well-established wooden tripod with carrying strap Proven long life due to use of selected alpine beech results in warp resistance and in good vibration characteristics Leica GST20-9 packaged length is 3.5 feet (107cm), fully extended leg length 5.9 feet (180cm) Click here to buy a better priced tripod

Leica CTP101 Wooden Tripod with Shoulder Strap

Click here to buy a better priced tripod Leica CTP101, Wooden Tripod with Shoulder Strap. In order to achieve the instrument specified accuracy it is vital that the correct tripod is used. The construction and weight of the tripod have a major influence on providing a stable platform for the instrument. This tripod has wooden legs. The wooden types have excellent vibration damping characteristics. The CTP101 Construction Tripod is manufactured in China with Leica specifications and offers a low cost alternative. No spare parts are available for the CTP range. 5/8 x 11 thread size. We reccomend the SokkiaHeavy Duty751282

Leica CTP102 Wooden Tripod with Shoulder Strap

Click here to buy a better priced tripod Leica CTP102 Wooden Tripod with Quick Clamp. In order to achieve the instrument specified accuracy it is vital that the correct tripod is used. The construction and weight of the tripod have a major influence on providing a stable platform for the instrument. This tripod has wooden legs. The wooden types have excellent vibration damping characteristics. The CTP102 Construction Tripod is manufactured in China with Leica specifications and offers a low cost alternative. No spare parts are available for the CTP range. 5/8 x 11 thread size. We reccomend the SokkiaHeavy Duty751282

Leica GST20-9 Wood Tripod

Click here to buy a better priced tripod Leica Tripods are well regarded by the market for being extremely stable and long lasting. Leica GST120-9 Sturdy Wooden Tripod, extension leg, 6 feet long, with auto-locking leg mechanism. The GST120-9 model provides a unique, patented self-closing feature for quick set-up and stowing. The Leica GST120-9 fits all Leica Geosystems levels, theodolites, total stations and GPS antenna. Pouch Not Included 5/8x11 Thread Size For all climates Bright Safety Color Robust, well-established wooden tripod with carrying strap Proven long life due to use of selected alpine beech results in warp resistance and in good vibration characteristics Leica GST120-9 packaged length is 3.5 feet (107cm), fully extended leg length 5.9 feet (180cm) Leica GST120-9 weighs 6.4kg (14.1lb) Click here to buy a better priced tripod

Leica GST20 Wood Tripod

Click here to buy a better priced tripod Tripods are well regarded by the market for being extremely stable and long lasting. Leica GST20 Sturdy Wooden Tripod, extension leg, 6 feet long. The Leica GST20 fits all Leica Geosystems levels, theodolites, total stations and GPS antenna. Pouch included 5/8x11 Thread Size For all climates Bright Safety Color Robust, well-established wooden tripod with carrying strap Proven long life due to use of selected alpine beech results in warp resistance and in good vibration characteristics Leica GST20 packaged length is 3.5 feet (107cm), fully extended leg length 5.9 feet (180cm) Leica GST20 weighs 6.4kg (14.1lb) Click here to buy a better priced tripod

Leica GST05 Wood Tripod

Click here to buy a better priced tripod Leica GST05 Wood Tripod, telescopic, with polymer coating, with accessories. 5/8 x 11 thread size. Click here to buy a better priced tripod

Tricase Carrying Case for Self Leveling Rotary Lasers

Carrying Case for LMH-CU LM-800 LM600 AL Series

Tricase Carrying Case for LM30

Carrying Case for LM30, Tripod and 8' Rod

CST/berger Carry Case for CST Laser AL Series

Replacement carry case for CST/berger or Daid White carry case Carrying Case-Hard For AL Series, Rugged

CST/berger Carry Case for CST Laser Digger Package

Replacement carry case for CST/berger or Daid White carry case Carrying Case-Hard for Digger Package

CST/berger Carry Case for CST Laser LM600 LM800

Replacement carry case for CST/berger or Daid White carry case Carrying Case-Hard, for LMH600,LM800

CST/berger Carry Case for CST Laser 57-LMRHC800

Replacement carry case for CST/berger or Daid White carry case 57-LMRHC800 Carrying case will accommodate the following: Laser Instrument, Detector, V-Mount, Target, Glasses, Remote.

CST/berger Carry Case for CST Laser 57-LMRHC700

Replacement carry case for CST/berger or Daid White carry case 57-LMRHC700 LMRHC700 is used with Laser and Detector Only. When Ordering, Please Specify Laser and Accessories to be used with case

CST Berger Rotary Laser Vertical Ceiling Wall Tripod Mount

Tripod Vertical Applications Mount Ceiling/Wall Mount Same as above, with a 5/8 x 11 female thread for mounting the level onto a tripod in order to project a vertical plumb line.

Grid Target with Magnetic Base, Green Beam Laser (Blue)

Features a magnetic base for attachment to metal studs or drop ceiling t-bars, and inch/cm graduations. CAT Description 57-TARGET-G Grid Target with Magnetic Base, Green BeamLaser

Green Beam Laser Glasses (Blue lenses)

Improves visibility of laser beams under bright conditions or over distances. Great for use with either rotary or straight-line laser tools which project a visible red beam. One size fits all. CAT Description 57-GLASSES-G BlueLaser Glasses

Pipelaser Carrying Case for David White Pipe Laser

49-DWPCASE Rugged and durable military grade designed case is strong and waterproof to stand up to the demands of both the jobsite and transportation.

Sokkia B1C 32x Engineer Grade Auto Level 737255

This model is simply Sokkia's best ever.It represents the state of the art in levelling technology,and comes in a compact,sturdy,and easier-to-use package.Extremely precise levelling has never been simpler! Accuracy over 1km double-run levelling is a remarkable 0.8mm,and it can be improved to 0.5mm using the optional parallel plate micrometer.Horizontal line of sight stability is assured by four suspension wires and a magnetic-damping compensator.Operating Sokkia's B1C B1 Engineer's Grade Levels are convenient thanks to features such as the two-speed focusing knob, distance-giving stadia lines, and the choice of horizontal circles on the B1C. This model offers the best of Sokkias technology in one rugged and complete instrument that is reliable and easy to set-up. Accurate Levelling The level's reticle can be fitted with the optional parallel plate micrometer for precise mesurement in encrements of 0.1mm.The accuracy obtained over 1km double-run levelling is boosted from 0.8mm to a remarkable 0.5mm with the parallel plate micrometer. Rapid,Easy Set-Up Using a s pherical-head tripod,setting up the level is fast and easy enen on anlged,uneven surfuces.Set the level onto the tripod head,centre the circular bubble,and away you go.It also fits flat-head tripods.Aiming,operable by right or left hand.Simply turn the instrument,then use the fine motion to aim the level at the target precisely.A two-speed focussing knob switches between coarse and fine focussing for even faster operation.The optics are designed to be bright and easy to use. Reliable Automatic Compensator Four suspension wires and magnetic damping action ensure statbiliy enen under rapidly changing atmospheric conditions,vibration,and shock.Precise damping even copes with hang-ups ins the compensator. Choice of Horizontal Circles for the B1C The B1C offers a choice of easy-to-use horizontal circles for laying off and measuring angles (direct reading to 10' or 0.1 gon). Stadia The stadia wires on the reticle allow easy calculations of distance.Simply multiply the distance on the rod between the top and bottom stadia lines by 100. Specifications: Length:270mm (10.6in) Objective aperature:45mm (1.8in) Magnification:32x Image:Erect Minimum focusing distance:2.3m (7.5ft) Approx. Sighting Distance:350' Levelling Accuracy w/o micrometer:0.8mm (0.03in) Levelling Accuracy with micrometer:0.5mm (0.02in) Includes: B1C Instrument,Lens Cap,Plumb Bob,Vinyl Cover,Tool kit,Operation manual,Hard carrying case.

SECO Triangular Scale Architect Tape

Once you use one of these triangular scale tapes, you'll never want to use a normal architect rule again! The Triangular Scale Architect Tape gives you a convenient, compact size without compromising practicality. The tape has easy-to-use locks, so measuring large dimensions on plans is a breeze! It's 24-inches long and locks at any length. The Architect Scale Tape features the following scales: 16, 3, 1 1/2, 1, 1/2, 1/4, 1/8, 3/4, 3/8, 3/16, 3/32, and 1/16

SECO 12-inch Open Clamp Bipod 5217-15-ABK

12-inch Open Clamp Bipod The 12-inch, lightweight bipod is used to keep a GPS or robotic pole off the ground when not in use. It is constructed of anodized aluminum. The bipod has a universal SECO 'open clamp' bipod head and rubber tipped legs that fold for storage. Weighs 0.9 lb (0.41 kg)

SECO Premier HD Wood Round-Head Tripod Dual Locks 5220-10-ORG

Premier Heavy-Duty, All-Wood, Round-Head Tripod Dual Locks This new heavy-duty tripod features all-wood legs with hand holes; select lock - dual locks quick-release and twisting locks or sinlge lock choice; a shoulder strap; and a 6.5-inch round head. The tripod extends to 68 inches (173 cm), and collapses to 44 inches (112 cm). Weighs 18.7 lbs (8.5 kg) Dual Lock: 5220-10-ORG

SECO Thumb-Release Mini Tripod 5218-05

The SECO Thumb Release Mini Tripod collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm). Weighs 4.5 lb (2.04 kg)

SECO Mini Tripod with 12-inch Legs 5218-15-ABK

Mini Tripod with 12-inch Legs This tripod is ideal for use with poles under 24-inches long. It's simple and easy to use. The legs are a fixed length of 12-inches each. The universal head accepts pole diameters of 1 inch to 1.25 inches and features a stainless steel clamp screw. The feet have rubber tips for gripping hard or slick surfaces. Weighs 1.3 lb (0.6 kg). Pole sold separately.

SECO Dual Hinge Bipod Quick Lever lock For 1 Inch Pole 5217-59

The Dual Hinge Bipod with Quick Lever is the perfect solution for setups on difficult terrain. The new dual leg hinges move in two directions. This bipod sets up fast on rocky, steep slopes, construction sites, or industrial sites where surrounding material may be in the way of proper leg placement. The push button thumb release legs on the Dual Hinge Bipod are the same as the field proven original open clamp tripod. The legs collapse to 43 inches (109.22 cm) and extend to 72 inches (182.88 cm). The Dual Hinge Bipod attaches to the pole with a Quick Lever lock. Weighs 4.2 lb (1.90 kg)

SECO Dual Hinge Bipod with Open Clamp Head 5217-57

This bipod is the perfect solution for setups on difficult terrain. The dual leg hinges move in two directions. This bipod sets up fast on rocky, steep slopes, construction sites, or industrial sites where surrounding material may be in the way of proper leg placement. The push button thumb release legs on the Dual Hinge Bipod are the same as the field proven original open clamp tripod. The legs collapse to 43 inches (109.22 cm) and extend to 72 inches (182.88 cm). The Dual Hinge Bipod attaches to the pole with the original standard open clamp. It weighs 4.2 lb (1.90 kg) Prism Pole Prism not included

SECO Quick Lever Bipod Thumb Release Legs 5217-50

This open clamp head features the SECO Quick Lever design that makes attaching or detaching the ONE INCH pole lightning fast. The lever cam action is mechanically simple and holds fast. The locking mechanism is made of non-marring Delrin with an EPDM 80-durometer rubber plug for positive grip. It works with1.25-in (32-mm)diameter poles. (For poles with one-inch (25 mm) diameters order 5217-51-XXX.) This new Quick Lever bipod features SECO's Thumb Release legs. The bipod can also be purchased with Quick Release legs (5211-5X-XXX). Weighs approximately 4.2 lb (1.90 kg)

SECO Quick Lever Bipod with Quick Release Legs 5211-50

This new open clamp head features a Quick Lever that makes attaching or detaching thepole lightning fast. The lever cam action is mechanically simple and holds fast. The locking mechanism is made of non-marring Delrin with an EPDM 80-durometer rubber plug for positive grip. It works with 1-1/4 in (32 mm) diameter poles. Forone-inch (25-mm) diameter, order 5211-51-XXX. This new Quick Lever bipod features SECO's Thumb Release legs. The bipod can also be purchased withThumb Release legs (5211-5X-XXX). Weighs approximately 4.2 lb (1.90 kg)

SECO Carbon Fiber Thumb Release Tripod 5219-05

Carbon Fiber Thumb Release Tripod The SECO Carbon Fiber Thumb Release Tripod uses the same design as the popular 5217-04 Bipod above, but weighs onlyfour pounds! The tripod features a large 5-lobe soft touch rubber clamping knob, and legs of super strong, lightweight carbon fiber. Legs extend to six feet (1.8 m) for use in uneven terrain. Collapses to 43 inches (109 cm) Weighs4 lb (1.81 kg)

SECO Thumb-Release Mini Bipod 5217-05

Ideal for robotic systems, the SECO mini Thumb-Release bipod is the same design as our popular 5217-04 bipod. It collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm). Includes the 5217-30 leg clip. Weighs 3.5 lb (1.6 kg)

SECO Alligator Clamp Prism Pole Tripod 5214-00

The tripod features a ball-and-socket head, which makes leveling a bubble easy. The rubberized jaws hold a pole (up to 2-inch OD) firmly in place. Telescopic legs extend from 80 cm (2.62 ft) to 127 cm (4.17 ft). Shown with the Pin Pole with Sliding Mini Prism System below right (6600-10, sold separately). Weighs 2.65 lb (1.2 kg)

SECO Optical Plummet Twist-Focus Tribrach Black 2152-02

DISCONTINUED SEE SECO 2152-05 The SECO 2152-02 series tribrach features a twist focus, 2.5X magnification, leveling screws with center line. It has an 8-minute circular vial, 3-prong forced centering and a 5/8 x 11 base. Easy plummet adjustment is achieved using the four opposing screws. The optical plummet has a focusing range of 1.5 to 50 ft (0.5 m to 15 m). Weighs 1.85 lb (0.84 kg)

Additional Leg for Dual Rapid Thumb Release Bi-Pod to Tri-Pod

Convert your Stakemill / SI / Sokkia pole bi-pod into a Tri-Pod with this thrid leg and adapter. Your Snap head is pre-drilled to accept this leg. We have included the screwws and billet adapter plate needed to make this conversion.

Leica Disto D2 Laser Distance Measuring

Measuring distances and calculating results with the smallest laser distance meter of the world. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, area and volume calculation make measuring fast and very reliable. The last 10 measurements are also stored. As with all Leica laser distance meters, the laser dot is clearly visible. You can always see your targeting point, even if the target object is in a hard to access area. Leica DISTO D2 you will never use a measuring tape again! Quick and easy Measure distances at the touch of a button and calculate areas or volumes. Measure from edges or corners With the flip-out end-piece you are equipped for any measuring situation. Small and handy Thanks to its ergonomic and compact design with soft grip, the Leica DISTO D2 sits securely in your hand and fits into any pocket. Clear display The results are shown on a 3-line display. The illuminated display is easily readable, even in the dark. Simply clever Minimum / maximum measurements, tracking and storage of results makes your work much easier. Included items - practical and clever: holster: stows everything away neatly hand loop: secures the instrument at all heights Features Your advantages Measuring range 0.05 m up to 60 m; typ. accuracy 1.5 mm Precise, fast and reliable indoor measurements Shortcut keys Easy-to-use and rapid access to frequently used functions Illuminated 3-line display Measured values can be read even in the dark Flip-out end-piece Measure from edges or corners Stake out function Stake-out equal distances Time delay release Measure without shake Simple Pythagorean functions Indirect height and width measurements for inaccessible positions IP 54 Splash and dust proof

CST 6 Inch Hand Level 1X 17-623

Features Applications: CST/Berger's Hand Level is 6 long with fixed eyepiece, adjustable reflector and internally mounted bubble assembly. Its hexagonal objective cap prevents rolling. Comes complete with a padded, Cordura nylon carrying case.

Laser Level PLS90 - 90 Degree

Features Applications: Fully self leveling, the PLS90 is a unique laser level. No more 3-4-5. Use your PLS90 and our universal base-tripod adapter for fast, accurate and dependable square layout for flooring-tile, framing (metal stud or wood), concrete foundations, pads and more. Features: The PLS90 System Includes: PLS90 Tool Carrying Case Universal Base Floor Target Operating Manual Spec Summary: Working Range: 250' Operating Time: 30 Hrs Dimensions: 2 x 2 7/8 x 3 3/6 Weight: 1.7 lbs. (.77 kg) Power Supply: 3 AA batteries Self Leveling Range: 6 Degrees Accuracy: 1/8 @ 100' Class II Laser Product Note: Detector is sold separately

Laser Level PLS360 - 360 Degree

Features Applications: Fully self leveling, the PLS360 provides a continuous 360 degree line of reference. The PLS360 offers one button set up for indoor-outdoor applications. Unlike rotary lasers with sensitive moving parts, this compact, bright and durable tool has no complicated features or multiple knob adjustments. The PLS360 simplifies your work day with the press of a button. How long does it take you to set up your rotary laser? Features: The PLS360 System Includes: PLS360 laser unit Carrying Case Wall bracket SLD laser detector Operating manual Spec Summary: Working Range: 250' Operating Time: +35 Hrs Dimensions: 3 1/8 x 5 x 4 1/2 Weight: 2.0 lbs. Power Supply: 3 D batteries Leveling Range: +/-6 Accuracy: 1/8 @ 100' Class II Laser Product

Pacific Laser Systems Laser Level PLS SLD Laser Detector

The PLS SLD can be used with any of the PLS tools Features Applications: NEW compact laser line detector. Use with PLS laser line tools to detect the line while outdoors or in bright conditions when you can not see the (indoor visible) lines. Allows PLS Line tools to be used outdoors to 250 feet. Features: Compact design Runs on 1 9 volt-battery (included) Works with level or plumb lines

Laser Level Palm - PLS180 - Horizontal/Vertical

Features Applications: This plumb, level and square laser line tool is brighter than most rotary lasers at a fraction of the cost. Fast, accurate and portable, the PLS180 Palm Laser saves you time and money when your bubble vial level or rotary laser is too cumbersome to too limited for the job. Features: The PLS180 Tool Includes: PLS180 Laser Unit Carrying case PLS180 pouch Wall bracket Operating manual Batteries Spec Summary: PLS180 Specifications Range: 100' Accuracy: +/-1/8 @ 30 feet Weight: 1.7 lbs. (.77 kg) Power Supply: 3 AA batteries Dimensions: 2 x 2 7/8 x 3 3/8 Fan Angle: 180 Self Leveling Range: 6 Operating Time: +30 hrs Class II Laser Product

Pacific Laser Systems Rotary Laser Level, PLS HVR 500

Features Applications: The PLS HVR 500 is a compact, mid range rotary laser designed for light commercial, residential, and remodeling projects. Horizontal and vertical applications; the PLS HVR 500 is versatile for short and mid range layout with an accuracy of 1/8 inch at 100 feet. Dual Slope Axis. Features: The PLS HVR 500 System Includes: PLS HVR 500 Carrying Case PLS RC 500 Remote Control Ceiling Bracket PLS HVD 500 Detector Operating Manual Spec Summary: Working Range: 500' Self Leveling Range: 5 degrees Accuracy: 1/8 @ 100' Power Supply: Nicad Dimensions: 5 x 4 3/4 x 6 Class II Laser Product

Leica GRZ4 639985 360 Degree Prism

SEE ALTERNATE OMNI 360 PRISM Perfect for robotic applications. Rubber caps for optimum protection of prisms. Range with TPS1100 4920ft under average conditions.

SECO Non-Tilting Prism Holder 6380-00

The holder is designed for use with screw-in 62-mm canisters and features both Zero and -30 mm offsets and a 5/8 x 11 threaded base. The height from the base of the prism to the center of glass is 115 mm (4.52 in). Weighs 0.80 lb (0.36 kg)

SECO 62 mm Non-Tilting Prism Assembly - 0 -30 Offsets 6440-10

SECOs 6440-10-FOR is an all-metal, non-tilting prism holder with a 62-mm, sealed prism canister. The holder features both 0 and -30 mm offsets. The height from the base of the prism to the center of glass is 115 mm (4.52 in). The target/holder is constructed of durable aluminum and coated with corrosion-proof electrostatic paint, in fluorescent-orange. It is equipped with a 5/8 x 11 threaded base. Ideal for using with a LaserTech Range Finder when coursing race track black top

Seco Pin Pole with 25-mm Mini Prism System

The 25-mm sliding prism system features a silver-coated prism and 0 offset. The holder easily slides up and down the pole, the knobs lock in height and tilt - they also double as vertical angle targets. An adjustable 40-minute circular vial is built in to the prism holder. The 12.2-mm OD pin pole features three sections - each 60-cm in length to achieve 1.8 m (5.91 ft); each color section (red or white) is 10 cm in length. Other features include a replaceable stainless steel point on the pole, accessory kit with plumb bob hook and cone for attachment to the prism for handheld applications and a system bag. This system is perfect for use with the Alligator Clamp Tripod, shown below right (5214-00, sold separately). Weighs 1.95 lb (0.9 kg) Shown with the Pin Pole with Sliding Mini Prism System below(5214-00 6600-10, 5214-00sold separately).

SECO 62mm Copper Coated Prism 2 sec Accuracy 6411-04

SECO 62mm Copper Coated Heay Duty Prism2 sec Accuracy 6411-04

SECO 62mm Copper Coated Prism 5 sec Accuracy 6411-03

SECO 62mm Copper Coated Heay Duty Prism 5 sec Accuracy 6411-03

SECO Copper-Coated Flexible Prism with Aluminum Stud 6411-02

Copper-Coated Flexible Prism with Aluminum Stud This copper-coated prism features an aluminum stud.

SECO 62 mm Silver-Coated Prism Nitrogen-Filled Canister 6411-00

62 mm Silver-Coated Prism with Nitrogen-Filled Canister The 62 mm silver-coated prism (with sealed canister) features

SECO 0 Offset Adapter for Eclipse Prism Assembly 6410-018

0 Offset Adapter for Eclipse Prism Assembly The 0 Offset Adapter is used with the Eclipse Prism Assembly (6400-00 )

SECO Prism Holder -30mm, -40mm Offset (Eclipse Style) 6410-00

Prism holder only - 30mm, -40mm Offset see this item for more details

SECO Stakeout Mini Prism with Site Cones -34mm 6405-14

This popular mini prism features site cones to improve vertical angle pointing. The site cones double as tilting-axis lock knobs. The adjustable 40-min vial is mounted on the front side and is easy to see and adjust. The prism is set at a -34offset position. Weighs 0.3 lb (0.14 kg)

SECO Nodal Point Stakeout Mini Prism Kit 6405-13

The prism kit features 0 and -17.5 mm offsets. The white site cones on the X and Y axes help centering instrument crosshairs. The heavy-duty point can handle the abuse on the bottom of a pole. The white adapter is used to make the prism height 115 mm for use with most standard prism poles. Weighs 0.8 lb (0.36 kg), 1.3 lb (0.59 kg) with heavy-duty point.

SECO Nodal Point Stakeout Mini Prism with Site Cones 6405-12

SECO 6405-04 25 mm Stakeout Prism Assembly / -34 mm Offset

This 25-mm copper-coated prism features aluminum double yoke construction with a tilting coaxial target. There are on-board 130-minute vials, top bottom. It includes replaceable plumb bob point. Height to center of prism w/plumb bob point: 100 mm. Comes with case 8024-00-ORG. Weighs 0.62 lb (0.28 kg)

SECO Premier Prism Assembly with 6 x 9 inch Target

The Premier Prism Assembly accepts most screw in type prisms. It is waterproof, and has a M20 universal mounting thread. The tilting holder is anodized aluminum and features an improved locking clamp screw design and an 18-gauge steel target. The prism can be mounted in either 0 or -30 mm offset positions. The tilting axis height is 115 mm. Weighs 1.75 lb (0.80 kg)

SECO Rear Locking 62 mm Premier Prism 6 x 9 inch 6402-20

This prism assembly design incorporates a simple stainless steel locking mechanism thats easy to set while adjusting the prism and target tilt. The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an O ring to prevent water and dust from getting inside. The prism can be mounted in either 0 or -30 mm offset positions. This assembly features a 6 x 9 inch target size. Other color combinations are available, see below. The tilting axis height is 115 mm. The 6402-20 weighs 1.75 lb (0.79 kg). Flo Orange and White shown above Number: Target Color: Target Size: 6402-20-FOW Flo Orange with Black 6 x 9 inches 6402-20-YLB Yellow with Black 6 x 9 inches 6402-20-FLB Flo Yellow with Black 6 x 9 inches 6401-20-FOB Flo Orange with Black 6 x 9 inches 6401-20-WHB White with Black 6 x 9 inches

SECO Standard Prism Assembly with 5.5 x 7 in Target 6402-10-050

The Standard Prism Assemblyaccepts ascrew intype prism. It is waterproof and has a M20 universal mounting thread. The tilting holder is powder-painted die cast aluminum. It uses a simple but proven locking system. The prism (not supplied) can be mounted in either 0 or -30 mm offset positions. The tilting axis height is 115 mm. Weighs 1.35 lb (0.62 kg) Number: Color: Size: 6402-10-050-YLB Yellow with Black 5.5 x 7 in 6402-10-050-FLB Fluorescent Yellow with Black 5.5 x 7 in 6402-10-050-FOB Fluorescent Orange with Black 5.5 x 7 in

SECO 62 mm Nodal Point Prism Assembly 6400-10

This assembly features three prism offset positions, 0, -30 and -40 (nodal). The 62 mm prism is silver coated and has a

SECO RC3 Adapter for SECO 6401 Prism

For existing SECO 360-prism owners, the 6401-00-RC3-050 adapter kit is available. It attaches easily with a stainless steel bolt.

SECO Tilting Triple Prism Holder 6341-10

NO PRISMS The Tilting Triple Prism Assembly is made from orange polycarbonate with metal inserts and an aluminum yoke. It holds one or three prisms, is compatible with most screw-in prisms, and has a 0, -30 prism offset. It has a peep sight for pointing the holder. The H.T. is 97 mm.

SECO 62 mm Premier Strobe Prism Assembly 6402-03

This assembly combines the popular SECO Premier target and holder with a strobe prism. Its perfect for low light conditions like tunneling, mining, or forestry applications the strobe is also useful in conditions where the target may be hard to see due to background light. The 62-mm silver-coated strobe prism flashes approximately every 1/2-second and features an easy on/off button on the canister. Use -30 mm or 0 offset. The height of the tilting axis is 115 mm. The prism uses a standard Sanyo CR-1/3N camera battery for approximately 24 hours of use. The assembly uses standard 5/8 x 11 female mounting. The 6402-03-WOR (shown) features the large target (6 x 9 in) a smaller target (5.5 x 7 in) version is also available. Other colors available on SECO Premier targets: Flo Yellow w/Black Flo Orange w/Black Flo Orange w/White Yellow w/Black White w/Orange (shown) Black w/White

SECO McHenry-Style Tripod 5215-00

SECO McHenry-Style Tripods are economical; these basic models feature simple brass clamp screws on each leg and an open head with stainless steel-threaded locking! The legs extend to 72 inches (182.9 cm) and collapse to 43 inches (109.2 cm). Weighs 4.9 lb (2.22 kg)

SECO McHenry-Style Bipod 5213-00

SECO McHenry-Style Bipods are economical; these models feature simple brass clamp screws on each leg and an open head with stainless steel-threaded locking! Bipod legs extend to 72 inches (182.9 cm) and collapse to 43 inches (109.2 cm). The bipod weighs 4.0 lb (1.81 kg)

SECO Quick-Release Prism Pole Bipod 5211-01

SECO Bipods are the industry standard! We're proud to introduce the next generation bipod. The Quick-Release It's the fastest bipod on the market, bar none. Direct Drive Quick-Release handles put the power and action right where you need it. Quick set up: Use the Quick-Release handles to drive the leg points into the ground, and to level the circular vial on your pole. Quick break down: Grab and squeeze both handles, collapse the legs and lift the pole to move to your next location. Simple. It features a simple but positive mechanical design with easy to adjust locking tension. Open clamp head with stainless steel clamp screw. It fits 1-, 1.25- and 1.50-inch diameter poles. Weighs 4.1 lbs

SECO Quick Release Pole Tripod 5210-01

SECO Tripods are the industry standard! We're proud to introduce the next generation bipod. The Quick-Release It's the fastest tripod on the market, bar none. Direct Drive Quick-Release handles put the power and action right where you need it. Quick set up: Use the Quick-Release handles to drive the leg points into the ground, and to level the circular vial on your pole. Added legs gives stability in uneven terrain or windy conditions. Quick break down: Grab and squeeze both handles, collapse the legs and lift the pole to move to your next location. Simple. It features a simple but positive mechanical design with easy to adjust locking tension. Open clamp head with stainless steel clamp screw. It fits 1-, 1.25- and 1.50-inch diameter poles. Weighs 4.9 lbs (2.22 kg)

SECO Premier Heavy-Duty Fiberglass Tripod Dual Clamp 5203-10-ORG

This all-fiberglass heavy-duty tripod features proven tripod design concepts. Its totally waterproof, so longer term setups in adverse weather conditions is not a problem. This tripod employs dual clamps for fast, stable setups. The quick clamps are made of metal with plated friction washers which also contribute to a fast setup. The proven twist-clamp design prevents slipping by binding the sliding leg. Its ideal for all instruments, total stations, robotics, and GPS gear. The tripod cap holds a combination tool that fits all bolts on the tripod. The legs extend to 72 inches and the triangular flat head features a 5/8 x 11 fastener. Weighs 18.5 lb (8.4 kg)

Seco Sliding Prism Pin Pole 1-1/4 inch Adapter For Bi-Pods

SECO Sliding Prism Pin Pole 1-1/4 inch Adapter For Bi-Pods Allows you to use standard survey prism pole bi-pods and tri-pods to hold the 1/2 mini slider prism pin poles

Seco Sliding Prism and Sectional Pole Kit Metric 5910-06

This mini-prism holder tilts and slides up and down the pin poles. It features a 25-mm zero offset silver-coated mini-prism made of high-quality anodized aluminum. The vertical angle site cones double as locks, one for height and one for prism tilt. The prism has a 40-min adjustable circular vial. A height pointer is built into the holder for accurate measure. Includes four 30-cm pole sections each with 15.24 cm mark. Featuring a replaceable plumb bob point on bottom section. This prism includes an adapter so prism can be used on any pole or tribrach adapter with 5/8 x 11 threads. It also Includes adapter so the mini-prism can be used hand held to measure flat surfaces or corners. System bag included. Weighs 1.40 lbs (0.63 kg)

SECO European Style Compact Portable Prism Pole System 5910-03

-34mm offset This new and improved system is ideal for all handheld prism work, topos or precise layout work. This system can be assembled in various pole-length configurations. For the first time ever, this system is available with the most accurate prism offset position; a -17.5-mm offset prism that places the optical center of the prism over the plumb line axis. This offset eliminates angular pointing errors at short sights. All aluminum parts are anodized red, clear, or blue to maintain machining accuracy. All sections machined lengths are known (30 cm) , so prism height can easily be calculated. The built-in 40-min vial on the prism assembly can be moved to top or bottom of the yoke. The white sight cones provide improved vertical angle pointing. This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, achieving prism height of 115-mm. Orange carrying case - made of Cordura - is included. Weighs 1.6 lb (0.73 kg) Number: Prism Type: Color: 5910-01-ARD 0, -30 mm offset (ARD shown) Red 5910-02-ARD -17.5 mm offset Red 5910-03-ARD -34 mm offset Red 5910-01-ABU 0, -30 mm offset Blue 5910-02-ABU -17.5 mm offset Blue 5910-03-ABU -34 mm offset Blue

SECO European Style Compact Portable Prism Pole System 5910-02

-17.5mm offset This new and improved system is ideal for all handheld prism work, topos or precise layout work. This system can be assembled in various pole-length configurations. For the first time ever, this system is available with the most accurate prism offset position; a -17.5-mm offset prism that places the optical center of the prism over the plumb line axis. This offset eliminates angular pointing errors at short sights. All aluminum parts are anodized red, clear, or blue to maintain machining accuracy. All sections machined lengths are known (30 cm) , so prism height can easily be calculated. The built-in 40-min vial on the prism assembly can be moved to top or bottom of the yoke. The white sight cones provide improved vertical angle pointing. This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, achieving prism height of 115-mm. Orange carrying case - made of Cordura - is included. Weighs 1.6 lb (0.73 kg) Number: Prism Type: Color: 5910-01-ARD 0, -30 mm offset (ARD shown) Red 5910-02-ARD -17.5 mm offset Red 5910-03-ARD -34 mm offset Red 5910-01-ABU 0, -30 mm offset Blue 5910-02-ABU -17.5 mm offset Blue 5910-03-ABU -34 mm offset Blue

SECO 15 Ft Adj Tip Compression Lock Prism Pole 5620-30

SECO Adj TipM Grad Compression Lock 2 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 15.251ft (4.65m)extended - 5.18ft (1.58)colapsed

SECO 15 Ft Adj Tip Compression Lock Prism Pole 5600-30

SECO Adj Tip D Grad Compression Lock 2 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 15.251ft (4.65m)extended - 5.18ft (1.58)colapsed

SECO 12 Ft Fix Tip Compression Lock Prism Pole 5622-20

SECO Fix Tip M Grad Compression Lock 2 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 11.81ft (3.6m)extended - 5.18ft (1.58)colapsed

SECO 12 Ft Adj Tip Compression Lock Prism Pole 5620-20

SECO Adj Tip M Grad Compression Lock 2 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 11.81ft (3.6m)extended - 5.18ft (1.58)colapsed

SECO 12 Ft Fix Tip Compression Lock Prism Pole 5612-20

SECO Fix Tip D Grad Compression Lock 2 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 11.81ft (3.6m)extended - 5.18ft (1.58)colapsed

SECO 8 Ft Fixed Compression Lock Prism Pole 5622-10

SECO Fix Tip M Grad Compression Lock 1 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 8.53ft (2.6m)extended - 4.97ft (1.516)colapsed

SECO 8 Ft Adj tip Compression Lock Prism Pole 5620-10

SECO Adj Tip M Grad Compression Lock 1 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 8.53ft (2.6m)extended - 4.97ft (1.516)colapsed

SECO 8 Ft Fixed Compression Lock Prism Pole 5612-10

SECO Fixed Tip D/M Grad Compression Lock 1 Sec Prism Pole This pole features a compression locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip or a fixed threaded tip, select below. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual or metric graduations on the inner pole. 8.53ft (2.6m)extended - 4.97ft (1.516)colapsed

SECO Aluminum Tripod With Antenna Mast 5300-12

The SECO 5300-12 Aluminum tripod with antenna mast gets your radio antenna to the desired height easily! The mast telescopes to 7.5 ft (2.3 m) and the tripod itself can be set to 5.5 ft (1.7 m) for a total elevation of 13 ft (4 m). The mast is aluminum with a 5/8 x 11 threaded tip. The antenna mast can be purchased separately to convert your existing heavy-duty tripod! Ask for the 5561-20 at your favorite SECO dealer.

SECO Tripod Hook Bracket for Trimble Recon 5196-15

The Tripod Hook Bracket keeps your Trimble Recon on the instrument tripod. The bracket is constructed of black anodized aluminum. It comes with an installation tool and an instruction sheet.

SECO Tripod Hook Bracket for TDS Ranger 300X, 500X Trimble TSC2

The Tripod Hook Bracket keeps your TDS Ranger 300X, 500X or Trimble TSC2 on the instrument tripod. The bracket is constructed of black anodized aluminum. It comes with stainless-steel screws and an instruction sheet.

SECO Lightweight Prism Pole Point Removable Tip 5194-05

This point features an anodized aluminum body and an easy-to-replace steel point. Weighs 0.16 lb (0.07 kg)

SECO Topo/Control Point 5193-01

Topo/Control Point The 5193-01 features a titanium point that will never wear out! Required for Artic Surveying and parts are not available without a 6 week lead time. Weighs 0.25 lb (0.11 kg)

Quante QBL-150HC-OT Over the Top Pipe Laser with Scope

Quante QBL-150HC-OT with Scope A High Power Solution For Underground Work. The Quante QBL-150HC is really a top model of its class. The QBL-150HC's laser spot ensures better visibility on the target as well as in direct sunlight. The stronger laser spot offers a higher distance range and a better visibility in each solution, including daylight on the pipe. Features: fully automatic self-leveling absolutely water and dustproof aluminum housing with IR-remote control, distance range up to 100 m integrated battery: microprocessor controlled quick charging high power diode, even in direct sunlight an extremely visible laser spot four rubberized bumpers guarantee safe placing, even in plastic pipes large, easy to operate switch panel and illuminated, easy to read LCD-display precise, sturdy and extremely handy More performance for those who need it. You decide! Range of application: The Pipe Laser QL 150 HD can cope with each kind of application. By using the easy, cost-efficient and sturdy accessories this laser can be utilized on all kinds of sites. Click here to download a brochure on the QL150HC Pipe Laser in PDF format. The QBL-150HC Package Includes: pipe laser with scope carrying case AC charger DC power cable operating manual One year warranty Does not include targets orunits legs/feet or remote

Quante QBL-150HC-OT Over the Top Pipe Laser with Remote

Quante QBL-150HC-OT A High Power Solution For Underground Work. The Quante QBL-150HC is really a top model of its class. The QBL-150HC's laser spot ensures better visibility on the target as well as in direct sunlight. The stronger laser spot offers a higher distance range and a better visibility in each solution, including daylight on the pipe. Features: fully automatic self-leveling absolutely water and dustproof aluminum housing with IR-remote control, distance range up to 100 m integrated battery: microprocessor controlled quick charging high power diode, even in direct sunlight an extremely visible laser spot four rubberized bumpers guarantee safe placing, even in plastic pipes large, easy to operate switch panel and illuminated, easy to read LCD-display precise, sturdy and extremely handy More performance for those who need it. You decide! Range of application: The Pipe Laser QL 150 HD can cope with each kind of application. By using the easy, cost-efficient and sturdy accessories this laser can be utilized on all kinds of sites. Click here to download a brochure on the QL150HC Pipe Laser in PDF format. The QBL-150HC Package Includes: pipe laser 7 button remote AC charger DC power cable operating manual carrying case One year warranty Does not include targets orunits legs/feet

Quante QBL-150HC Pipe Laser

Quante QBL-150HC A High Power Solution For Underground Work. The Quante QBL-150HC is really a top model of its class. The QBL-150HC's laser spot ensures better visibility on the target as well as in direct sunlight. The stronger laser spot offers a higher distance range and a better visibility in each solution, including daylight on the pipe. Features: fully automatic self-leveling absolutely water and dustproof aluminum housing with IR-remote control, distance range up to 100 m integrated battery: microprocessor controlled quick charging high power diode, even in direct sunlight an extremely visible laser spot four rubberized bumpers guarantee safe placing, even in plastic pipes large, easy to operate switch panel and illuminated, easy to read LCD-display precise, sturdy and extremely handy More performance for those who need it. You decide! Range of application: The Pipe Laser QL 150 HD can cope with each kind of application. By using the easy, cost-efficient and sturdy accessories this laser can be utilized on all kinds of sites. Click here to download a brochure on the QL150HC Pipe Laser in PDF format. The QBL-150HC Package Includes: pipe laser 7 button remote pipe target AC charger DC power cable centering feet for 10 pipe centering feet for 12 pipe operating manual carrying case One year warranty

PENTEL Sharp Drafting Pencils 0.9mm 209G

The 1 selling automatic drafting pencil and the industry standard. Designed to meet the most critical demands of the professional. 4mm fixed sleeve is ideal for template work. Available on 0.5mm fine, 0.7mm medium and 0.9mm thick lines. Refillable with Pentel's Super Hi-Polymer Lead and Z2-1 refill reaser. 0.9mm available in Yellow

PENTEL Sharp Drafting Pencils 0.7mm 207C

OMNI Abney Hand Level 23090

Abney Hand Level The OMNI Abney Level is ideal for preliminary surveys, landscaping, or DIY work where the determination of slope, angle, and percentage of grade is required. The Abney Level's scale is graduated in both degrees of incline and percentage of slope. Use the Abney Level to find the slope and grade for: Stormwater Drains Paving Landscape Design Other DIY uses Users Guide for Abney Levels

OMNI Hand Level, 5X / 8-Inch / External Vial 23040

This 8-inch hand level offers a magnification of 5X! The level features an objective and eyepiece suitable for easy focusing and all metal construction. This harvest gold hand level includes a convenient padded case - which includes a belt loop. Perfect for carrying to the job site.

OMNI Abney Hand Level / 5X / 8-inch 23085

Abney level features a magnification of 5X and an objective and eyepiece adjustable for easy focusing. Stadia lines 1:100 ratio. Other features include degree and percent scales with vernier reading to 10 minutes; all metal construction. The Abney level is 8 inches in length and harvest gold in color. Comes with a padded belt-loop case.

OMNI KE-Style Abney Level 23080

This Abney level features 1X magnification and four scales (Degrees, Percent, Topographic, and Chainage Correction). The 6-1/2-inch level is all metal and sports a harvest gold finish. Comes with a padded belt-loop case.

OMNI 25mm Sliding Mini Prism Pole Set

Featuring an easy slide system, the assembly knobs lock the prism in the desired height and tilt. The silver coated 25mm prism comes in a 0mm offset holder. Includes (3) 60cm pole sections, with 10cm color divisions for a total 1.8m height achievement. Complete with a 40 minute circular vial and case for the entire kit. Plumb bob hook, cone and replaceable stainless steel point also included.

SECO Safety Vest Meets ANSI/ISEA Class 3 Requirements 8366

Fluorescent Yellow This vest meets ANSI/ISEA 107-2004 Class 3 specifications now required to meet the FHWA mandate for safety on Federal-aid highways (effective November, 2008). It is made from durable ANSI/ISEA compliant polyester. This vest has heavy-duty YKK zippers. It has 4-inch (10.16 cm) wide reflective tape with 2-inch (5.08 cm) wide silver stripes made with 3M Scotchlite Reflective Material. The padded collar is made with Outlast fabric on the inside to help regulate body temperature. This vest features multiple pockets for cell phone, tapes, radio, pencils, etc., plus two hand warmer pockets and two inside pockets. It comes with easy-to-access dual mic clips. The chest sizes range from 46-66 inches (127.00-167.64 cm). This vest is available in fluorescent yellow.

SECO Safety Utility Vest Meets ANSI/ISEA Class 3 Requirements

Fluorescent Orange This vest meets ANSI/ISEA 107-2004 Class 3 specifications now required to meet the FHWA mandate for safety on Federal-aid highways (effective November, 2008). It is made from durable ANSI/ISEA compliant polyester. This vest has heavy-duty YKK zippers. It has 4-inch (10.16 cm) wide reflective tape with 2-inch (5.08 cm) wide silver stripes made with 3M Scotchlite Reflective Material. The padded collar is made with Outlast fabric on the inside to help regulate body temperature. This vest features multiple pockets for cell phone, tapes, radio, pencils, etc., plus two hand warmer pockets and two inside pockets. It comes with easy-to-access dual mic clips. The chest sizes range from 46-66 inches (127.00-167.64 cm). This vest is available in fluorescent orange